Radio Frequency Interfere Filter

RF02575-25LQ1

RF02575-25LQ1
(NSN) National Stock Number
5915-00-007-9226
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00765
Schedule B Code
8527995030
Summary

1.070 inches nominal overall length, 0.540 inches nominal body length, 0.375 inches nominal body outside diameter, +55.0 to 2000.0 vibration resistance range in hertz, -55.0 to 125.0 deg celsius operating temp range, 50.0 ohms blank source impedance rating per function

DAC HCC DMIL RNCC
5 - - 5
RNVC SADC MSDS RNAAC
2 - - ZZ
Identification

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

INC FIIG Concept Condition
00765 A047B0 3 1
Specifications
Overall Length
1.070 inches nominal
Details The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
Body Length
0.540 inches nominal
Details A measurement of the longest dimension of the body,in distinction from width.
Body Outside Diameter
0.375 inches nominal
Details The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
Vibration Resistance Range In Hertz
+55.0 to 2000.0
Details The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.
Operating Temp Range
-55.0 to 125.0 deg celsius
Details The minimum and maximum limits of temperature at which the item is rated for operation.
Source Impedance Rating Per Function
50.0 ohms blank
Details The total opposition per function,presented by a source of energy to the input terminals of an item.
Load Impedance Per Function
50.0 ohms blank
Details The total opposition per function,presented by a load to the output terminals of an item.
Operating Current Rating Per Function In Amps
3.0 blank
Details The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.
Principal Circuitry Type Per Function
capacitance-inductance blank
Details Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.
Mounting Facility Screw Thread Series Designator
unf
Details A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.
Inclosure Type
hermetically sealed
Details Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
Mounting Facility Type And Quantity
1 threaded bushing 3rd function
Details Indicates the type and number of facilities by which the item is mounted.
Functional Terminal Type And Quantity
1 tab, solder lug input 1st function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
1 tab, solder lug output 2nd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Operating Voltage Rating And Type Per Function
100.0 volts dc blank
Details The level of electrical potential and type of current,per function,for which the item is designed.
Nominal Thread Size
0.250 inches
Details A designation that is used for the purpose of general identification of the thread.
Maximum Dielectric Withstanding Dc Voltage
200.0 volts at sea level
Details The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.
Special Features
capacitor at mounting end
Details Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.
Style Designator
round terminal/terminals on opposite surfaces
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
5903831-1 0CAM5 5 - 5 2 - ZZ
1MRB52D 27154 5 - 5 9 - TX
8431-1021 14158 5 - 5 9 - TX
5903831-1 99167 5 - 5 9 - TX
GF825CP3LR 26512 1 - 3 2 - TX
GF825CS2R5LR 26512 1 - 5 9 - TX
RF2575-25L 13619 1 - 5 9 - TX
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
P U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
58500 - P -
RVC WCC TCC SHC
- 72D Z 9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

  • Fast Quote Times
  • Qualified sales team
  • 100% Product Inspections
  • Counterfeit Parts Prevention
Manufacturer
EMS DEVELOPMENT CORPORATION DBA EMS DEVELOPMENT CORP
CAGE: 13619
YAPHANK , NY , 11980-2301
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-007-9226
What is the NIIN of the NSN 5915-00-007-9226?
The National Item Identification Number (NIIN) of the NSN 5915-00-007-9226 is 00-007-9226
When the NSN 5915-00-007-9226 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, Jul 14, 1972
Does the NSN 5915-00-007-9226 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-007-9226 contain any hazardous material?
No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

We are one of the largest suppliers of National Stock Number (NSN) parts in the world. Here at NSN Equipment, we live on the cutting edge to give you the best service we possibly can.

And that service is why our customers return to us time and time again. Our credibility and our accolades only serve as testament to our industry-leading nature.

Contact
3555 Agricultural Center Dr.
St. Augustine, FL, 32092
United States
© 2024 NSN Equipment, Inc. All rights reserved.
Made in USA