Radio Frequency Interfere Filter
RF2575-25L
1.070 inches nominal overall length, 0.540 inches nominal body length, 0.375 inches nominal body outside diameter, +55.0 to 2000.0 vibration resistance range in hertz, -55.0 to 125.0 deg celsius operating temp range, 50.0 ohms blank source impedance rating per function
DAC | HCC | DMIL | RNCC |
---|---|---|---|
1 | - | - | 5 |
RNVC | SADC | MSDS | RNAAC |
---|---|---|---|
9 | - | - | TX |
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.
INC | FIIG | Concept | Condition |
---|---|---|---|
00765 | A047B0 | 3 | 1 |
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
A measurement of the longest dimension of the body,in distinction from width.Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Details
The minimum and maximum limits of temperature at which the item is rated for operation.Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Details
The total opposition per function,presented by a load to the output terminals of an item.Details
The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Details
Indicates the type and number of facilities by which the item is mounted.Details
Indicates the functional type and number of terminals providing electrical connection to the item.Details
Indicates the functional type and number of terminals providing electrical connection to the item.Details
The level of electrical potential and type of current,per function,for which the item is designed.Details
A designation that is used for the purpose of general identification of the thread.Details
The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
---|---|---|---|---|---|---|---|
5903831-1 | 0CAM5 | 5 | - | 5 | 2 | - | ZZ |
1MRB52D | 27154 | 5 | - | 5 | 9 | - | TX |
8431-1021 | 14158 | 5 | - | 5 | 9 | - | TX |
5903831-1 | 99167 | 5 | - | 5 | 9 | - | TX |
GF825CP3LR | 26512 | 1 | - | 3 | 2 | - | TX |
GF825CS2R5LR | 26512 | 1 | - | 5 | 9 | - | TX |
RF02575-25LQ1 | 13619 | 5 | - | 5 | 2 | - | ZZ |
HMIC | PMIC | ESD/EMI | Criticality |
---|---|---|---|
P | U | - | - |
UFC | HMC | LTL | LCL |
---|---|---|---|
58500 | - | P | - |
RVC | WCC | TCC | SHC |
---|---|---|---|
- | 72D | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
What is the NIIN of the NSN 5915-00-007-9226?
When the NSN 5915-00-007-9226 was assigned to the Federal Catalog?
Does the NSN 5915-00-007-9226 contain any precious metals?
Does the NSN 5915-00-007-9226 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.