Recessed Washer
2146130
0.500 inches minimum and 0.501 inches maximum hole diameter, 0.812 inches nominal outside diameter, 0.625 inches minimum and 0.630 inches maximum recess diameter, 0.062 inches nominal recess depth, 0.184 inches minimum and 0.187 inches maximum material thickness, 88000 pounds per square inch minimum tensile strength
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | KZ |
A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes:washer, concave, retainer, packing, and thrust type washers. See also spacer, sleeve; and spacer, stepped.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15933 | A022B0 | 1 | 1 |
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Details
The length of a straight line which passes through the center of the recess,and terminates at the circumference.Details
A measurement between specified points on the recess,in distinction from height.Details
A measurement of the smallest dimension of the material,in distinction from length or width.Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Details
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.Details
None.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 2146130 | 44114 | 1 | - | 5 | 9 | - | HD |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 95100 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
What is the NIIN of the NSN 5310-00-016-8612?
When the NSN 5310-00-016-8612 was assigned to the Federal Catalog?
Does the NSN 5310-00-016-8612 contain any precious metals?
Does the NSN 5310-00-016-8612 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.