Solenoid Valve
AV78-156-1
(NSN) National Stock Number
4810-00-007-4738
Federal Supply Classification
4810 Powered Valves
Item Name Code
10998
Schedule B Code
8481809005
Summary
Diaphragm flow control device, closed flow control device normal operation position, socket (tube) all ends connection style, 0.170 current rating in amps, solenoid valve operation method, unthreaded internal tube all ends connection type
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | C |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | AC | - | ZZ |
Identification
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see valve (1), linear, directional control. It may be inline or cartridge (manifold) design. Excludes:valve (1), butterfly.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 10998 | A046B0 | 1 | 1 |
Specifications
Flow Control Device
diaphragm
Details
The part that controls the flow through the item.Flow Control Device Normal Operation Position
closed
Details
The position of the moving member/s/ controlling flow through the valve with the solenoid in the de-energized position.Connection Style
socket (tube) all ends
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.Current Rating In Amps
0.170
Details
The electrical current rating,expressed in amperes.Valve Operation Method
solenoid
Details
The means used to control the operation of the valve.Connection Type
unthreaded internal tube all ends
Details
Indicates the type of connection/s/.Mounting Position
horizontal or vertical
Details
The installed position for which the item is designed.Maximum Operating Pressure
100.0 pounds per square inch single response
Details
The maximum pressure at which the item is rated for operation.Voltage In Volts And Current Type
115.0 ac
Details
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.Nominal Outside Diameter Tube Accommodated
0.750 inches all ends
Details
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.Phase
single
Details
The number of alternating current phases.Special Features
manual override
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Frequency In Hertz
60.0
Details
The cycles per second /hertz/ of the alternating current.Material
copper alloy body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
rubber butadiene-acrylonitrile class nbr flow control device and plastic polyamide flow control device
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 303 seat
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
aisi 303 assn std single material response seat
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
astm b283 assn std single material response body
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Media For Which Designed
air 1st response
Details
The type of media for which the item is designed.Media For Which Designed
water-oil-gas 2nd response
Details
The type of media for which the item is designed.Surface Treatment
cadmium
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Style Designator
straight thru
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-s-901 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 4810PL1340799 | 9009H | 9 | - | 6 | 9 | - | WP |
| AV160-700-2 | 04845 | A | - | 5 | 9 | - | AX |
| AV160-700-2 115 | 04845 | 6 | - | C | 1 | - | ZZ |
| AV160700-008 | 04845 | 6 | - | C | 1 | - | ZZ |
| AV160700-8 | 04845 | A | - | 5 | 9 | - | ZZ |
| AV507874-8 | 04845 | 5 | - | 3 | 2 | - | ZZ |
| AV-160700-8 | 60XL5 | 5 | - | 3 | 1 | - | ZZ |
| 3155547 | 24047 | A | - | C | 1 | - | AX |
| 3155547PC118 | 24047 | 5 | - | C | 1 | - | AX |
| 3155547PC118 | 6X081 | E | - | C | 1 | - | AX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 29300 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 658 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
FAQs
Frequently asked questions for NSN 4810-00-007-4738
What is the NIIN of the NSN 4810-00-007-4738?
The National Item Identification Number (NIIN) of the NSN 4810-00-007-4738 is 00-007-4738
When the NSN 4810-00-007-4738 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, Jul 14, 1972
Does the NSN 4810-00-007-4738 contain any precious metals?
Does not contain precious metal
Does the NSN 4810-00-007-4738 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products
Solenoid Valve
4810-00-007-4738
4810PL1340799
Solenoid Valve
4810-00-007-4738
AV160-700-2
Solenoid Valve
4810-00-007-4738
AV160-700-2 115
Solenoid Valve
4810-00-007-4738
AV160700-008
Solenoid Valve
4810-00-007-4738
AV160700-8
Solenoid Valve
4810-00-007-4738
AV507874-8
Solenoid Valve
4810-00-007-4738
AV-160700-8
Solenoid Valve
4810-00-007-4738
3155547
Solenoid Valve
4810-00-007-4738
3155547PC118
Solenoid Valve
4810-00-007-4738
3155547PC118