Pin-Rivet
ASPFF-DT08-13
(NSN) National Stock Number
5320-00-001-5178
Federal Supply Classification
5320 Rivets
Item Name Code
67165
Schedule B Code
7318230000
Summary
3a thread class, right-hand thread direction, 0.842 inches minimum and 0.862 inches maximum fastener length, flush countersunk head style, 0.094 inches nominal width between flats, 0.263 inches minimum and 0.265 inches maximum shank diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 4 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | 9Z |
Identification
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 67165 | A528U0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Fastener Length
0.842 inches minimum and 0.862 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
flush countersunk
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Width Between Flats
0.094 inches nominal
Details
None.Shank Diameter
0.263 inches minimum and 0.265 inches maximum
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Shank Style
pin-rivet, straight, threaded
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.Head Major Diameter
0.507 inches nominal
Details
None.Grip Length
0.751 inches minimum and 0.812 inches maximum
Details
A measurement of the longest dimension of the grip,in distinction from width.Thread Quantity Per Inch
48
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
180000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Nominal Thread Size
0.216 inches
Details
A designation that is used for the purpose of general identification of the thread.Countersink Angle
99.0 degrees minimum and 101.0 degrees maximum
Details
The included angle of the countersink.Special Features
hex socket in head
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
steel comp 8740 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
aisi assn std single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-416,ty 2,cl 2 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
uns
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49790 | - | Q | Q |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
FAQs
Frequently asked questions for NSN 5320-00-001-5178
What is the NIIN of the NSN 5320-00-001-5178?
The National Item Identification Number (NIIN) of the NSN 5320-00-001-5178 is 00-001-5178
When the NSN 5320-00-001-5178 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, Sep 22, 1972
Does the NSN 5320-00-001-5178 contain any precious metals?
Type/content is unknown
Does the NSN 5320-00-001-5178 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.