Blind Rivet

MLSP-B05-02

(NSN) National Stock Number

5320-00-008-3719

Federal Supply Classification

5320 Rivets

Item Name Code

00864

Schedule B Code

7616103000

Summary

0.263 inches maximum fastener length, universal head style, 0.067 inches minimum and 0.077 inches maximum head height, 0.155 inches minimum and 0.159 inches maximum shank diameter, self-plugging mechanically locked stem shank style, 0.296 inches minimum and 0.328 inches maximum head major diameter

DAC	HCC	DMIL	RNCC
4	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	ZF

Identification

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes:nut, blind assembly.

INC	FIIG	Concept	Condition
00864	A040A0	-	1

Specifications

Fastener Length

0.263 inches maximum

Details

The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

Head Style

universal

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

Head Height

0.067 inches minimum and 0.077 inches maximum

Details

A measurement from the bottom to the top of the head,in distinction from depth.

Shank Diameter

0.155 inches minimum and 0.159 inches maximum

Details

The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

Shank Style

self-plugging mechanically locked stem

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

Head Major Diameter

0.296 inches minimum and 0.328 inches maximum

Details

None.

Expansion Device

serrated stem-type w

Details

The device by which the item is expanded and set.

Grip Length

0.063 inches minimum and 0.125 inches maximum

Details

A measurement of the longest dimension of the grip,in distinction from width.

Shear Strength

755 single pounds per square inch

Details

The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

Special Features

self-locking

Details

Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.

Material

aluminum alloy 2024 stem

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material

aluminum alloy 5056 sleeve

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material Document And Classification

qq-a-430 fed spec single material response sleeve

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Material Document And Classification

qq-a-430 fed spec single material response stem

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Surface Treatment

anodize or chromate sleeve

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Surface Treatment Document And Classification

mil-a-8625 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response sleeve

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Specification/Standard Data

80205-nas1919 professional/industrial association standard

Details

The document designator of the specification or standard which established the item of supply.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
54217-5-02	0055K	1	-	5	2	-	YA
54217-5-02	F5442	4	-	5	2	-	ZF
54217-5-02	F0210	4	-	5	2	-	ZF
5320PL0737015	9009H	9	-	6	9	-	WP
MLSP-B05-02	0HDW7	2	-	5	2	-	KZ
MLSP-B05-02	17446	2	-	5	9	-	KZ
MLSP-B05-02	29666	2	-	5	9	-	KZ
MLSP85-2	29666	5	-	C	1	-	ZZ
MLSPB5-2	29666	4	-	5	9	-	9Z
GR500L5-2	26512	2	-	5	2	-	KE
NAS1919B05-02	80205	E	-	3	2	-	KZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
54760	-	U	-

RVC	WCC	TCC	SHC
-	576	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Fast Quote Times
Qualified sales team
100% Product Inspections
Counterfeit Parts Prevention

Manufacturer

HUCK

CAGE: F6167

US , 95450

FRANCE

View Products

FAQs

Frequently asked questions for NSN 5320-00-008-3719

What is the NIIN of the NSN 5320-00-008-3719?

The National Item Identification Number (NIIN) of the NSN 5320-00-008-3719 is 00-008-3719

When the NSN 5320-00-008-3719 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Fri, Jul 21, 1972

Does the NSN 5320-00-008-3719 contain any precious metals?

Type/content is unknown

Does the NSN 5320-00-008-3719 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.