Blind Rivet
BC10A4F
(NSN) National Stock Number
5320-00-012-0745
Federal Supply Classification
5320 Rivets
Item Name Code
00864
Schedule B Code
7318230000
Summary
0.406 inches nominal fastener length, flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style, 0.310 inches minimum and 0.312 inches maximum shank diameter, threaded self-plugging shank w/sleeve shank style, 0.626 inches minimum and 0.635 inches maximum head major diameter, threaded mandrel expansion device
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 4 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | 9Z |
Identification
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes:nut, blind assembly.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00864 | A040A0 | - | 1 |
Specifications
Fastener Length
0.406 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Shank Diameter
0.310 inches minimum and 0.312 inches maximum
Details
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.Shank Style
threaded self-plugging shank w/sleeve
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.Head Major Diameter
0.626 inches minimum and 0.635 inches maximum
Details
None.Expansion Device
threaded mandrel
Details
The device by which the item is expanded and set.Grip Length
0.220 inches minimum and 0.281 inches maximum
Details
A measurement of the longest dimension of the grip,in distinction from width.Hardness Rating
30.0 rockwell c minimum overall and 45.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Shear Strength
10350 double pounds per square inch
Details
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.Countersink Angle
99.0 degrees minimum and 101.0 degrees maximum
Details
The included angle of the countersink.Material
iron alloy 660 bolt
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
iron alloy 660 nut
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
iron alloy 660 sleeve
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5732 assn std single material response bolt or ams 5737 assn std single material response bolt
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
ams 5732 assn std single material response nut or ams 5737 assn std single material response nut
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
ams 5732 assn std single material response sleeve or ams 5737 assn std single material response sleeve
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
passivate bolt
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
passivate nut
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
passivate sleeve
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response bolt
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response nut
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response sleeve
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Specification/Standard Data
80205-nas1672 professional/industrial association standard
Details
The document designator of the specification or standard which established the item of supply.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| BC10A4F | C4293 | 4 | - | 5 | 2 | - | 9Z |
| F312ALS4 | C4293 | 4 | - | 5 | 2 | - | 9Z |
| F312ALS4 | 98524 | 4 | - | 5 | 2 | - | 9Z |
| 3M166-10-4 | 76301 | 4 | - | 5 | 2 | - | 9Z |
| NAS1672-5L4 | 80205 | 4 | - | 3 | 2 | - | 9Z |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| - | - | - | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | - | - | - |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
HOWMET GLOBAL FASTENING SYSTEMS INC DIV TORRANCE OPERATIONS
CAGE: 92215
TORRANCE
, CA
, 90505-5103
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5320-00-012-0745
What is the NIIN of the NSN 5320-00-012-0745?
The National Item Identification Number (NIIN) of the NSN 5320-00-012-0745 is 00-012-0745
When the NSN 5320-00-012-0745 was assigned to the Federal Catalog?
It was assigned 27 years ago, on Mon, Nov 17, 1997
Does the NSN 5320-00-012-0745 contain any precious metals?
Type/content is unknown
Does the NSN 5320-00-012-0745 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products