Tapping Screw
143189
(NSN) National Stock Number
5305-00-014-3189
Federal Supply Classification
5305 Screws
Item Name Code
41756
Schedule B Code
7318140000
Summary
0.250 inches nominal fastener length, round head style, 0.287 inches minimum and 0.309 inches maximum head diameter, 0.107 inches minimum and 0.120 inches maximum head height, 0.050 inches nominal spline width, slot internal drive style
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | XX |
Identification
A hardened externally threaded fastener whose thread extends to the bearing surface of the head. The thread may be fluted or otherwise designed to cut or form its own mating thread. Excludes:screw, assembled washer.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 41756 | A003B0 | - | 1 |
Specifications
Fastener Length
0.250 inches nominal
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.287 inches minimum and 0.309 inches maximum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.107 inches minimum and 0.120 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Spline Width
0.050 inches nominal
Details
None.Internal Drive Style
slot
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.Features Provided
casehardened
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Nonmachine Thread Style
gimlet point (type a, ab or ba)
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.Nonmachine Nominal Thread Diameter
0.164 inches
Details
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
cadmium overall or zinc overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Test Data Document
81348-ff-s-107 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| FF-S-107C | 81348 | E | - | 4 | 1 | - | ZZ |
| FFS107TYPEASTYLE1S | 81348 | E | - | 4 | 1 | - | XX |
| 143189 | 24617 | X | - | 5 | 9 | - | XX |
| 80X658 | 95201 | X | - | 5 | 9 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER
CAGE: 12204
CENTER LINE
, MI
, 48015-1241
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5305-00-014-3189
What is the NIIN of the NSN 5305-00-014-3189?
The National Item Identification Number (NIIN) of the NSN 5305-00-014-3189 is 00-014-3189
When the NSN 5305-00-014-3189 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5305-00-014-3189 contain any precious metals?
Does not contain precious metal
Does the NSN 5305-00-014-3189 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products