Product Description: Minimum Inside Bending Radius: 7", thread size: 1.062", Outside Diameter: 1.03", Inside Diameter: 0.75", color: black
Product Description: Minimum Inside Bending Radius: 7", thread size: 1.062", Outside Diameter: 1.03", Inside Diameter: 0.75", color: black
| Media For Which Designed | Air single response and fuel/oil, hydrocarbon single response and water single response |
| Measuring Method and Length | 107 inches |
| Special Features | Inner conveying tube material-rubber, synthetic |
| Inside Surface Condition | Smooth |
| Sectional Shape Style Cross | Round |
| Vacuum In Torr | 50.8 |
| Thread Class | 3b 1st end |
| Thread Direction | Right-hand 1st end |
| Inside Diameter | 0.75 inches |
| Temp Rating | -40 degree fahrenheit single response and 200 degree fahrenheit single response |
| Temp Rating | -40 degree fahrenheit and 200 degree fahrenheit single response |
| Outside Diameter | 1.03 inches |
| Minimum Inside Bending Radius | 7 inches |
| Exterior Color | Black |
| Connection Style | Swivel nut flare 1st end |
| End Connection Design | Straight 1st end |
| End Fitting Component and Material | Complete fitting copper alloy all ends |
| Connection Type | Threaded internal tube 1st end |
| Features Provided | Reusable end fittings |
| Second End Relationship With First End | Identical |
| Thread Quantity Per Inch | 12 1st end |
| First End Swivel Action Capability | Not included |
| Burst Test Pressure | 1000 pounds per square inch |
| Layer Composition and Location | Outer layer braided textile yarn |
| Layer Composition and Location | Outer layer braided textile yarn err-100 |
| Unable To Decode | Unable to decode |
| Maximum Operating Pressure | 250 pounds per square inch |
| Nominal Thread Size | 1.062 inches 1st end |
| Hydrostatic Test Pressure | 500 pounds per square inch |
| Seat Angle | 37 degrees 1st end |
| Outer Covering Environmental Protection | Mildew resistant and oil resistant |
| Media For Which Designed | Air and fuel/oil, hydrocarbon and water single response |
| Thread Series Designator | Un 1st end |