Product Description: Thread Size: 1.062" 1st end, Seat Angle: 37 degrees 1st end, temp rating: -67-450 degrees fahrenheit single response, Outside Diameter: 0.75", Hydrostatic Test Pressure: 2000 pounds per square inch
Product Description: Thread Size: 1.062" 1st end, Seat Angle: 37 degrees 1st end, temp rating: -67-450 degrees fahrenheit single response, Outside Diameter: 0.75", Hydrostatic Test Pressure: 2000 pounds per square inch
| Outer Covering Environmental Protection | Corrosion resistant |
| Hydrostatic Test Pressure | 2000 pounds per square inch |
| Seat Angle | 37 degrees 1st end |
| Nominal Thread Size | 1.062 inches 1st end |
| Maximum Operating Pressure | 1000 pounds per square inch |
| Layer Composition and Location | Outer layer braided corrosion resistant steel wire |
| Burst Test Pressure | 5000 pounds per square inch |
| Thread Quantity Per Inch | 12 1st end |
| Features Provided | Electrostatic discharge capability and internal support |
| Connection Type | Threaded internal tube 1st end |
| End Connection Design | Straight 1st end |
| Connection Style | Swivel nut flare 1st end |
| Exterior Color | Natural |
| Minimum Inside Bending Radius | 6.5 inches |
| Outside Diameter | 0.75 inches |
| Temp Rating | -67 degrees fahrenheit single response and 450 degrees fahrenheit single response |
| Inside Diameter | 0.625 inches |
| Thread Class | 3b 1st end |
| Thread Direction | Right-hand 1st end |
| Sectional Shape Style Cross | Round |
| Vacuum In Torr | 50.8 |
| Inside Surface Condition | Smooth |
| Measuring Method and Length | 10 inches working |
| Special Features | Cres internal support spring |
| Thread Series Designator | Unj 1st end |
| Specification/standard Data | 81349-mil-h-25579 government specification |
| Nondefinitive Spec/std Data | 1 class |