Product Description: Maximum Operating Pressure: 3000 pounds per square inch, Minimum Inside Bending Radius: 5", temp rating: -65-400 degrees fahrenheit single response, Burst Test Pressure: 14000 pounds per square inch
Product Description: Maximum Operating Pressure: 3000 pounds per square inch, Minimum Inside Bending Radius: 5", temp rating: -65-400 degrees fahrenheit single response, Burst Test Pressure: 14000 pounds per square inch
| Outer Covering Environmental Protection | Corrosion resistant |
| Flow Angle | 45 degrees 1st end |
| Hydrostatic Test Pressure | 6000 pounds per square inch |
| Seat Angle | 8.5 degrees 2nd end |
| Seat Angle | 8.5 degrees 1st end |
| Nominal Thread Size | 0.719 inches 2nd end |
| Nominal Thread Size | 0.719 inches 1st end |
| Maximum Operating Pressure | 3000 pounds per square inch |
| Layer Composition and Location | Outer layer braided corrosion resistant steel wire |
| First End Swivel Action Capability | Not included |
| Burst Test Pressure | 14000 pounds per square inch |
| Second End Relationship With First End | Not identical |
| Thread Quantity Per Inch | 20 2nd end |
| Thread Quantity Per Inch | 20 1st end |
| Features Provided | Electrostatic discharge capability |
| Connection Type | Threaded internal tube 1st end |
| Connection Type | Threaded internal tube 2nd end |
| End Fitting Component and Material | Complete fitting steel corrosion resisting all ends |
| End Connection Design | Straight 2nd end |
| End Connection Design | Elbow 1st end |
| Connection Style | Swivel nut, inverted flare 2nd end |
| Connection Style | Swivel nut, inverted flare 1st end |
| Minimum Inside Bending Radius | 5 inches |
| Outside Diameter | 0.55 inches minimum and 0.59 inches maximum |
| Temp Rating | -65 degrees fahrenheit and 400 degrees fahrenheit single response |
| Temperature Rating | -65 degrees fahrenheit single response and 400 degrees fahrenheit single response |
| Inside Diameter | 0.315 inches minimum and 0.345 inches maximum |
| Thread Direction | Right-hand 2nd end |
| Thread Direction | Right-hand 1st end |
| Thread Class | 3b 1st end |
| Thread Class | 3b 2nd end |
| Sectional Shape Style Cross | Round |
| Criticality Code Justification | Feat |
| Inside Surface Condition | Smooth |
| Measuring Method and Length | 12.25 inches working |
| Second End Swivel Action Capability | Not included |
| Special Features | Weapon system essential |
| Special Features | Inner conveying tube material-plastic, tetrafluoroethylene reinforced; weapon system essential |
| Media For Which Designed | Air single response and hydraulic fluid single response |
| Media For Which Designed | Air and hydraulic fluid single response |
| Thread Series Designator | Unjs 1st end |
| Thread Series Designator | Unjs 2nd end |