Product Description: Minimum Tensile Strength: 160000 pounds per square inch, Fastener Length: 0.344-0.375", thread length: 0.202-0.295", Countersink Angle: 99-101 degrees, Head Diameter: 0.322-0.385"
Product Description: Minimum Tensile Strength: 160000 pounds per square inch, Fastener Length: 0.344-0.375", thread length: 0.202-0.295", Countersink Angle: 99-101 degrees, Head Diameter: 0.322-0.385"
| Specification/standard Data | 80205-nas1102 professional/industrial association standard |
| Screw Surface Treatment Document and Classification | Qq-p-35 fed spec single treatment response |
| Thread Series Designator | Unjf |
| Thread Class | 3a |
| Thread Direction | Right-hand |
| Thread Length | 0.202 inches minimum and 0.295 inches maximum |
| Fastener Length | 0.344 inches minimum and 0.375 inches maximum |
| Head Diameter | 0.322 inches minimum and 0.385 inches maximum |
| Internal Drive Style | Torque set |
| Head Style | Flat countersunk |
| Nominal Thread Diameter | 0.19 inches |
| Minimum Tensile Strength | 160000 pounds per square inch |
| Thread Quantity Per Inch | 32 |
| Countersink Angle | 99 degrees minimum and 101 degrees maximum |
| Screw Material | Iron alloy 660 |
| Screw Surface Treatment | Passivate |
| Screw Material Document and Classification | Ams 5737 assn std single material response |
| Part Number | Manufacturer | |
|---|---|---|
| NAS1102E3-6 | National Aerospace Standards | Quote |
| 10124845 | Nimikkeistokeskus Ncb Finland | Quote |