Electrolytic Fixed Capacitor
(NSN) National Stock Number
5910-01-140-6392
Federal Supply Classification
5910 Capacitors
Item Name Code
00008
Schedule B Code
8532290040
Summary
W/twist tab mtg, terminal(s) on one end body style, not established reliability indicator, 1.375 inches nominal body diameter, 3.062 inches minimum and 4.062 inches maximum body length, one terminal common to each section schematic diagram designator, plain foil anode type
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | TX |
Identification
A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00008 | A010B0 | 1 | 1 |
Specifications
Body Style
w/twist tab mtg, terminal(s) on one end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Reliability Indicator
not established
Details
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.Body Diameter
1.375 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the circumference.Body Length
3.062 inches minimum and 4.062 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Schematic Diagram Designator
one terminal common to each section
Details
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.Anode Type
plain foil
Details
The general construction and/or form of the anode material.Electrical Polarization
nonpolarized
Details
An indication of whether or not the item normally will accept flow of current in one direction only.End Item Identification
television set,type an/sxq(v)
Details
The national stock number or the identification information of the end equipment for which the item is a part.Section Quantity
4
Details
The number of sections included.Capacitance Value Per Section
40.000 microfarads 1st section and 40.000 microfarads 1st section40.000 microfarads 2nd section and 50.000 microfarads 3rd section and 80.000 microfarads 4th section
Details
The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.Nonderated Operating Temp
10.0 deg celsius minimum and 85.0 deg celsius maximum
Details
The temperature/s/ at which an item can function without voltage derating.Nonderated Continuous Voltage Rating And Type Per Section
350.0 dc 1st section and 350.0 dc 2nd section and 50.0 dc 3rd section and 350.0 dc 4th section
Details
The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.Tolerance Range Per Section
-10.00 to 100.00 percent 1st section and -10.00 to 100.00 percent 2nd section and -10.00 to 100.00 percent 3rd section and -10.00 to 100.00 percent 4th section
Details
The limits of permissible deviation per section of a measured value from a specified value.Case Material
metal
Details
The chemical compound or mechanical mixture properties of which the case is fabricated. please use mrc matt with isac table 0326 in place of this canceled mrc.Capacitive Electrode Material
aluminum
Details
The chemical compound or mechanical mixture properties of which the capacitive electrode is fabricated.Power Factor At Reference Temp In Percent
4.5000
Details
The ratio of resistance to impedance measured at reference temperature.Dc Leakage At Reference Temp
1.300 milliamperes
Details
Stray direct current of relatively small value flows through the capacitor when voltage is impressed across it,measured at reference temperature.Terminal Surface Treatment
solder
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated. the treatment is designed to protect the terminal surface(s) and cannot be wiped off.Special Features
equivalent series resistance 1st and 4th sect. 3 ohms,2nd sect. 6 ohms,3rd sect. 20 ohms
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Terminal Type And Quantity
4 tab, solder lug
Details
Indicates the type and number of terminals for providing electrical connection.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34450 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
FAQs
Frequently asked questions for NSN 5910-01-140-6392
What is the NIIN of the NSN 5910-01-140-6392?
The National Item Identification Number (NIIN) of the NSN 5910-01-140-6392 is 01-140-6392
When the NSN 5910-01-140-6392 was assigned to the Federal Catalog?
It was assigned 42 years ago, on Fri, Oct 15, 1982
Does the NSN 5910-01-140-6392 contain any precious metals?
Does not contain precious metal
Does the NSN 5910-01-140-6392 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.