Product Description: thread length: 0.375", thread size: 0.375", Operating Temperature Range: -55 to 85 degree celsius, length: 4.125", diameter: 2", Tab, solder lug terminal
Product Description: thread length: 0.375", thread size: 0.375", Operating Temperature Range: -55 to 85 degree celsius, length: 4.125", diameter: 2", Tab, solder lug terminal
| Style Designator | Tap, circular, bushing mount |
| Test Data Document | 81349-mil-s-3786 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type |
| Contact Load Current Rating | 5 amperes resistive load ac at sea level |
| Contact Load Current Rating | 3 amperes resistive load dc at sea level and 2 amperes inductive load dc at sea level |
| First Flat Length | 0.25 inches single actuator |
| Thread Class | 2a single mounting facility |
| Overall Length | 4.125 inches |
| Hazardous Locations/environmental Protection | Explosion proof |
| Thread Length | 0.375 inches single mounting facility |
| Flat Height | 0.205 inches minimum single actuator and 0.215 inches maximum single actuator |
| Shaft Diameter | 0.248 inches minimum single actuator and 0.252 inches maximum single actuator |
| Shaft Length | 0.75 inches single actuator |
| Individual Section Quantity | 6 |
| Overall Diameter | 2 inches maximum |
| Nonturn Device Type | Slotted bushing at 12:00 o'clock |
| Operating Temperature Range | -55 to 85 degree celsius |
| Pole Quantity | 1 each section rear |
| Switch Contact Basic Design | Nonpile-up symmetrical |
| Throw Quantity | 24 each section rear |
| Contact Voltage Rating In Volts | 115 ac at sea level |
| Mounting Method | Threaded bushing single mounting facility |
| Nominal Thread Size | 0.375 inches single mounting facility |
| Contact Voltage Rating In Volts | 28 dc at sea level |
| Shaft Flat/slot Angular Location | 180 degrees from contact position 1 single actuator |
| Switch Actuator Indexing Position Quantity | 24 single actuator |
| Contact Switching Action | Breaks before makes each section rear |
| Shaft Type | Round, flatted single actuator |
| Terminal Type | Tab, solder lug |
| Switch Actuator Positioning Increment | 15 degrees single actuator |
| Thread Series Designator | Unef single mounting facility |
| Part Number | Manufacturer | |
|---|---|---|
| 56-1974-6C24NCD | Janco Corporation | Quote |