Quartz Crystal Unit
(NSN) National Stock Number
5955-00-231-6107
Federal Supply Classification
5955 Oscillators and Piezoelectric Crystals
Item Name Code
00196
Schedule B Code
8541900000
Summary
1.750 inches minimum and 1.940 inches maximum overall length, 0.595 inches minimum and 0.655 inches maximum terminal length, 1.090 inches minimum and 1.170 inches maximum overall width, 1.155 inches minimum and 1.285 inches maximum body length, 0.380 inches minimum and 0.460 inches maximum overall thickness, 0.120 inches minimum and 0.130 inches maximum terminal diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 4 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | XX |
Identification
An item which consists of a quartz crystal resonator(s), suitably mounted in a holder, quartz crystal.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00196 | A059A0 | - | 1 |
Specifications
Overall Length
1.750 inches minimum and 1.940 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Terminal Length
0.595 inches minimum and 0.655 inches maximum
Details
A measurement of the longest dimension of a terminal,in distinction from width.Overall Width
1.090 inches minimum and 1.170 inches maximum
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Body Length
1.155 inches minimum and 1.285 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Overall Thickness
0.380 inches minimum and 0.460 inches maximum
Details
An overall measurement of the smallest dimension of an item,in distinction from length or width.Terminal Diameter
0.120 inches minimum and 0.130 inches maximum
Details
The length of a straight line which passes through the center of a terminal,and terminates at the circumference.Mode Of Oscillation
fundamental
Details
The mode of frequency at which the device is designed to operate.Circuit Resonance
antiresonance
Details
The condition existing when the frequency or vibration equals the natural frequency.Load Capacitance In Picofarads
34.5 minimum and 35.5 maximum
Details
The amount of electrical capacitance under a load condition,required for normal operation in a circuit,expressed in picofarads.Specified Frequency
6.270 megahertz
Details
The frequency at which the item is designed to operate under specified conditions.Center To Center Distance Between Terminals
0.495 inches minimum and 0.505 inches maximum
Details
The center to center distance between terminals.Operating Temp Range
-55.0 to 90.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Frequency Tolerance For Operating Temp In Percent
-0.020 to 0.020
Details
The permissible frequency deviation within the operating temperature range,expressed in percent.Equivalent Resistance Value In Ohms
80.0 nominal
Details
The equivalent (effective) resistance for which the item is rated,expressed in ohms.Material
plastic cover, holder
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Style Designator
rectangular body, pin terminals
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-milc16 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | W |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| 1 | 658 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
FAQs
Frequently asked questions for NSN 5955-00-231-6107
What is the NIIN of the NSN 5955-00-231-6107?
The National Item Identification Number (NIIN) of the NSN 5955-00-231-6107 is 00-231-6107
When the NSN 5955-00-231-6107 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 5955-00-231-6107 contain any precious metals?
Type/content is unknown
Does the NSN 5955-00-231-6107 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.