Quartz Crystal Unit
(NSN) National Stock Number
5955-00-728-3646
Federal Supply Classification
5955 Oscillators and Piezoelectric Crystals
Item Name Code
00196
Schedule B Code
8541900000
Summary
0.530 inches maximum overall length, 0.5003 inches minimum terminal length, 0.435 inches maximum overall width, 0.402 inches maximum body width, 0.150 inches maximum body thickness, 0.183 inches maximum overall thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| E | - | - | 4 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | ZZ |
Identification
An item which consists of a quartz crystal resonator(s), suitably mounted in a holder, quartz crystal.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00196 | A059A0 | - | 1 |
Specifications
Overall Length
0.530 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Terminal Length
0.5003 inches minimum
Details
A measurement of the longest dimension of a terminal,in distinction from width.Overall Width
0.435 inches maximum
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Body Width
0.402 inches maximum
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Thickness
0.150 inches maximum
Details
A measurement of the smallest dimension of a body,in distinction from length or width.Overall Thickness
0.183 inches maximum
Details
An overall measurement of the smallest dimension of an item,in distinction from length or width.Terminal Diameter
0.016 inches minimum and 0.019 inches maximum
Details
The length of a straight line which passes through the center of a terminal,and terminates at the circumference.Mode Of Oscillation
fundamental
Details
The mode of frequency at which the device is designed to operate.Circuit Resonance
antiresonance
Details
The condition existing when the frequency or vibration equals the natural frequency.Load Capacitance In Picofarads
29.5 minimum and 30.5 maximum
Details
The amount of electrical capacitance under a load condition,required for normal operation in a circuit,expressed in picofarads.Specified Frequency
5.225 megahertz
Details
The frequency at which the item is designed to operate under specified conditions.Center To Center Distance Between Terminals
0.184 inches minimum and 0.200 inches maximum
Details
The center to center distance between terminals.Operating Temp Range
-55.0 to 105.0 deg celsius and -55.0 to 125.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Drive Level Rating
4.0 milliwatts minimum and 6.0 milliwatts maximum
Details
The drive level at which the item is designed to operate.Frequency Tolerance For Operating Temp In Percent
-0.005 to 0.005 and -0.0010 to 0.0010
Details
The permissible frequency deviation within the operating temperature range,expressed in percent.Equivalent Resistance Value In Ohms
75.0 maximum
Details
The equivalent (effective) resistance for which the item is rated,expressed in ohms.Material
glass cover, holder
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Style Designator
rectangular body, gull wing
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-c-3098/38 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Specification/Standard Data
81349-mil-c-3098/42 government specification
Details
The document designator of the specification or standard which established the item of supply.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 289-0194-000 | 13499 | 5 | - | C | 1 | - | TX |
| 289-0194-00 | 00136 | 5 | - | C | 1 | - | ZZ |
| CR64/U5M225000 | 81349 | E | - | 2 | 2 | - | TX |
| MIL-C-3098/42 | 81349 | E | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34525 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
FAQs
Frequently asked questions for NSN 5955-00-728-3646
What is the NIIN of the NSN 5955-00-728-3646?
The National Item Identification Number (NIIN) of the NSN 5955-00-728-3646 is 00-728-3646
When the NSN 5955-00-728-3646 was assigned to the Federal Catalog?
It was assigned 64 years ago, on Sun, Jan 1, 1961
Does the NSN 5955-00-728-3646 contain any precious metals?
Does not contain precious metal
Does the NSN 5955-00-728-3646 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products