Mica Dielectric Fixed Capacitor

0160-2130

(NSN) National Stock Number

5910-00-001-7244

Federal Supply Classification

5910 Capacitors

Item Name Code

00005

Schedule B Code

8532290020

Summary

W/o mtg facilities terminal(s) on one surface body style, not established reliability indicator, 0.188 inches nominal terminal length, 0.480 inches maximum body length, 0.410 inches maximum body width, 0.230 inches maximum body height

DAC	HCC	DMIL	RNCC
5	-	-	C

RNVC	SADC	MSDS	RNAAC
1	9F	-	ZZ

Identification

A capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.

INC	FIIG	Concept	Condition
00005	A010B0	1	1

Specifications

Body Style

w/o mtg facilities terminal(s) on one surface

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

Reliability Indicator

not established

Details

An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.

Terminal Length

0.188 inches nominal

Details

A measurement of the longest dimension of a terminal,in distinction from width.

Body Length

0.480 inches maximum

Details

A measurement of the longest dimension of the body,in distinction from width.

Body Width

0.410 inches maximum

Details

A measurement taken at right angles to the length of the body,in distinction from thickness.

Body Height

0.230 inches maximum

Details

A measurement from the bottom to the top of the body,in distinction from depth.

Center To Center Distance Between Terminals Parallel To Length

0.203 inches minimum and 0.265 inches maximum

Details

The center to center distance between terminals parallel to the length of the item.

Terminal Diameter

0.032 inches nominal

Details

The length of a straight line which passes through the center of a terminal,and terminates at the circumference.

Schematic Diagram Designator

no common or grounded electrode(s)

Details

A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.

End Item Identification

los angeles class ssn(688),kidd class ddg,virginia class cgn(41),ticonderoga class cg(47),spruance class dd(963),oliver perry class ffg,seawolf class ssn,forrestal class cv,nimitz class cvn

Details

The national stock number or the identification information of the end equipment for which the item is a part.

Insulation Resistance At Maximum Operating Temp

20000.0 megohms

Details

Direct current resistance between two conductors that are separated by an insulating material,measured at the maximum operating temperature of the item.

Capacitance Value Per Section

865.000 picofarads single section

Details

The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.

Nonderated Operating Temp

-55.0 deg celsius minimum and 125.0 deg celsius maximum

Details

The temperature/s/ at which an item can function without voltage derating.

Nonderated Continuous Voltage Rating And Type Per Section

100.0 dc single section

Details

The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.

Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius

+0.0 to 70.0 single section

Details

The minimum and maximum values of the permissible change in capacitance per section caused by a change in temperature,expressed in parts per million per degree celsius.

Criticality Code Justification

feat

Details

The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

Tolerance Range Per Section

-1.00 to 1.00 percent single section

Details

The limits of permissible deviation per section of a measured value from a specified value.

Case Material

plastic

Details

The chemical compound or mechanical mixture properties of which the case is fabricated. please use mrc matt with isac table 0326 in place of this canceled mrc.

Insulation Resistance At Reference Temp

100000.0 megohms

Details

Direct current resistance between two conductors that are separated by an insulating material,measured at reference temperature.

Quality Factor At Reference Temp

1000.0000

Details

The ratio of capacitive reactance to resistance,measured at reference temperature.

Terminal Surface Treatment

solder

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated. the treatment is designed to protect the terminal surface(s) and cannot be wiped off.

Special Features

weapons system essential

Details

Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.

Terminal Type And Quantity

2 uninsulated wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
0160-2130	28480	1	-	5	9	-	TX
0160-2130	1LQK8	5	-	3	9	-	ZZ
RDM15F8650F1C	14655	1	-	5	9	-	TX
HP15865PF1C1	57582	5	-	5	1	-	TX
RDM15F8650F1C	00853	1	-	5	9	-	TX
RDM15F8650F1C	72136	1	-	5	9	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34450	-	P	-

RVC	WCC	TCC	SHC
-	72D	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Fast Quote Times
Qualified sales team
100% Product Inspections
Counterfeit Parts Prevention

Manufacturer

KEYSIGHT TECHNOLOGIES INC

CAGE: 7ZXR5

COLORADO SPRINGS , CO , 80907-3423

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5910-00-001-7244

What is the NIIN of the NSN 5910-00-001-7244?

The National Item Identification Number (NIIN) of the NSN 5910-00-001-7244 is 00-001-7244

When the NSN 5910-00-001-7244 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Wed, Sep 27, 1972

Does the NSN 5910-00-001-7244 contain any precious metals?

Type/content is unknown

Does the NSN 5910-00-001-7244 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.