Ceramic Dielectr Fixed Capacitor
D15-390M
(NSN) National Stock Number
5910-00-103-7771
Federal Supply Classification
5910 Capacitors
Item Name Code
00007
Schedule B Code
8532290040
Summary
Chip type body style, not established reliability indicator, 0.150 inches nominal terminal length, 0.150 inches nominal body diameter, 0.031 inches nominal body length, no common or grounded electrode(s) schematic diagram designator
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| E | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00007 | A010B0 | 1 | 1 |
Specifications
Body Style
chip type
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Reliability Indicator
not established
Details
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.Terminal Length
0.150 inches nominal
Details
A measurement of the longest dimension of a terminal,in distinction from width.Body Diameter
0.150 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the circumference.Body Length
0.031 inches nominal
Details
A measurement of the longest dimension of the body,in distinction from width.Schematic Diagram Designator
no common or grounded electrode(s)
Details
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.Capacitance Value Per Section
39.000 picofarads single section
Details
The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.Nonderated Operating Temp
-55.0 deg celsius minimum and 150.0 deg celsius maximum
Details
The temperature/s/ at which an item can function without voltage derating.Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius
-750.0 single section
Details
The constant that represents the proportionate change in capacitance per section caused by a change in temperature,expressed in parts per million per degree celsius.Nonderated Continuous Voltage Rating And Type Per Section
25.0 dc single section
Details
The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius
-100.0 to 100.0 single section
Details
The limits of permissible deviation of the temperature coefficient per section from the rated value,expressed in parts per million per degree celsius.Tolerance Range Per Section
-20.00 to 20.00 percent single section
Details
The limits of permissible deviation per section of a measured value from a specified value.Case Material
ceramic
Details
The chemical compound or mechanical mixture properties of which the case is fabricated. please use mrc matt with isac table 0326 in place of this canceled mrc.Insulation Resistance At Reference Temp
10000.0 megohms
Details
Direct current resistance between two conductors that are separated by an insulating material,measured at reference temperature.Dissipation Factor At Reference Temp In Percent
2.500
Details
The ratio of resistance to capacitive reactance measured at reference temperature.Terminal Surface Treatment
solder
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated. the treatment is designed to protect the terminal surface(s) and cannot be wiped off.Precious Material And Location
terminal surfaces gold
Details
An indication of the precious material and its location in the item.Test Data Document
96214-531452-8 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Terminal Type And Quantity
2 bonding pad
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| N1S000D390M | 16546 | 6 | - | 5 | 9 | - | TX |
| D15-390M | 90634 | A | - | 5 | 2 | - | TX |
| 40744 | 93958 | A | - | 3 | 2 | - | TX |
| 43300-8 | 93958 | 5 | - | 5 | 2 | - | TX |
| 531452-8 | 96214 | A | - | 7 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | G | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34450 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
FAQs
Frequently asked questions for NSN 5910-00-103-7771
What is the NIIN of the NSN 5910-00-103-7771?
The National Item Identification Number (NIIN) of the NSN 5910-00-103-7771 is 00-103-7771
When the NSN 5910-00-103-7771 was assigned to the Federal Catalog?
It was assigned 56 years ago, on Wed, Jun 12, 1968
Does the NSN 5910-00-103-7771 contain any precious metals?
Contains gold
Does the NSN 5910-00-103-7771 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products