Electrolytic Fixed Capacitor

10047-1289

(NSN) National Stock Number

5910-00-114-0796

Federal Supply Classification

5910 Capacitors

Item Name Code

00008

Schedule B Code

8532290040

Summary

W/o mtg facilities, axial terminals body style, not established reliability indicator, 2.500 inches nominal terminal length, 0.758 inches nominal body diameter, 2.297 inches nominal body length, electrode(s) grounded to case, w/gnd terminal schematic diagram designator

DAC	HCC	DMIL	RNCC
5	-	-	C

RNVC	SADC	MSDS	RNAAC
1	-	-	48

Identification

A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

INC	FIIG	Concept	Condition
00008	A010B0	1	1

Specifications

Body Style

w/o mtg facilities, axial terminals

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

Reliability Indicator

not established

Details

An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.

Terminal Length

2.500 inches nominal

Details

A measurement of the longest dimension of a terminal,in distinction from width.

Body Diameter

0.758 inches nominal

Details

The length of a straight line which passes through the center of the body,and terminates at the circumference.

Body Length

2.297 inches nominal

Details

A measurement of the longest dimension of the body,in distinction from width.

Schematic Diagram Designator

electrode(s) grounded to case, w/gnd terminal

Details

A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.

Anode Type

plain foil

Details

The general construction and/or form of the anode material.

Impedance At Minimum Operating Temp In Ohms

5.6

Details

The total opposition offered to the flow of an alternating or pulsating current,expressed at minimum operating temperature in ohms.

Electrical Polarization

polarized

Details

An indication of whether or not the item normally will accept flow of current in one direction only.

Capacitance Value Per Section

470.000 microfarads single section

Details

The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.

Nonderated Operating Temp

-55.0 deg celsius minimum and 85.0 deg celsius maximum

Details

The temperature/s/ at which an item can function without voltage derating.

Dc Leakage At Maximum Operating Temp

474.0 milliamperes

Details

Stray direct current of relatively small value which flows through the item when voltage is impressed across it,measured at maximum operating temperature.

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Details

The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.

Tolerance Range Per Section

-10.00 to 30.00 percent single section

Details

The limits of permissible deviation per section of a measured value from a specified value.

Case Material

metal

Details

The chemical compound or mechanical mixture properties of which the case is fabricated. please use mrc matt with isac table 0326 in place of this canceled mrc.

Capacitive Electrode Material

aluminum

Details

The chemical compound or mechanical mixture properties of which the capacitive electrode is fabricated.

Dissipation Factor At Reference Temp In Percent

10.0000

Details

The ratio of resistance to capacitive reactance measured at reference temperature.

Dc Leakage At Reference Temp

79.000 microamperes

Details

Stray direct current of relatively small value flows through the capacitor when voltage is impressed across it,measured at reference temperature.

Terminal Surface Treatment

solder

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated. the treatment is designed to protect the terminal surface(s) and cannot be wiped off.

Case Insulation Material

plastic

Details

The chemical compound or mechanical mixture properties of which the case insulation is fabricated.

Test Data Document

81349-mil-c-39018+3 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Terminal Type And Quantity

2 uninsulated wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
80181500000	A3489	9	-	5	1	-	ZA
999/4/43079/004	K0668	9	-	5	1	-	ZA
538233-155	96214	5	-	C	1	-	48
538233-739	96214	5	-	C	1	-	48
600D379A1	81349	6	-	5	9	-	TU
M39018-03-0739	81349	3	-	5	9	-	TU
M39018/03-0639	81349	3	-	2	2	-	TX
M39018+3+0739	81349	3	-	5	9	-	TX
MIL-C-39018-3	81349	3	-	4	1	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34450	-	P	-

RVC	WCC	TCC	SHC
-	658	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Fast Quote Times
Qualified sales team
100% Product Inspections
Counterfeit Parts Prevention

Manufacturer

COOPER CROUSE-HINDS, LLC DBA AIRPORT LIGHTING DIVISION

CAGE: 18192

WINDSOR , CT , 06095-1384

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5910-00-114-0796

What is the NIIN of the NSN 5910-00-114-0796?

The National Item Identification Number (NIIN) of the NSN 5910-00-114-0796 is 00-114-0796

When the NSN 5910-00-114-0796 was assigned to the Federal Catalog?

It was assigned 51 years ago, on Wed, May 23, 1973

Does the NSN 5910-00-114-0796 contain any precious metals?

Type/content is unknown

Does the NSN 5910-00-114-0796 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.