Ceramic Dielectr Fixed Capacitor

C09660-1591

(NSN) National Stock Number

5910-00-132-5968

Federal Supply Classification

5910 Capacitors

Item Name Code

00007

Schedule B Code

8532290040

Summary

W/o mtg facilities terminal(s) on one surface body style, established reliability indicator, 0.0010 reliability failure rate level in percent, 1.250 inches minimum terminal length, 0.190 inches nominal body length, 0.190 inches nominal body width

DAC	HCC	DMIL	RNCC
5	-	-	C

RNVC	SADC	MSDS	RNAAC
1	A5	-	TX

Identification

A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

INC	FIIG	Concept	Condition
00007	A010B0	1	1

Specifications

Body Style

w/o mtg facilities terminal(s) on one surface

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

Reliability Indicator

established

Details

An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.

Reliability Failure Rate Level In Percent

0.0010

Details

The rate of failure determined under specified conditions to establish the reliability of an item,expressed in percent.

Terminal Length

1.250 inches minimum

Details

A measurement of the longest dimension of a terminal,in distinction from width.

Body Length

0.190 inches nominal

Details

A measurement of the longest dimension of the body,in distinction from width.

Body Width

0.190 inches nominal

Details

A measurement taken at right angles to the length of the body,in distinction from thickness.

Body Height

0.090 inches nominal

Details

A measurement from the bottom to the top of the body,in distinction from depth.

Center To Center Distance Between Terminals Parallel To Length

0.200 inches nominal

Details

The center to center distance between terminals parallel to the length of the item.

Terminal Diameter

0.025 inches nominal

Details

The length of a straight line which passes through the center of a terminal,and terminates at the circumference.

Schematic Diagram Designator

no common or grounded electrode(s)

Details

A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.

Insulation Resistance At Maximum Operating Temp

10000.0 megohms

Details

Direct current resistance between two conductors that are separated by an insulating material,measured at the maximum operating temperature of the item.

Capacitance Value Per Section

68000.000 picofarads single section

Details

The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.

Voltage Temp Limits Per Section In Percent Capacitance Change

-25.0 to 15.0 with rated voltage applied single section

Details

The maximum permissible capacitance change per section with temperature over the operating temperature range,measured either with or without rated voltage applied.

Nonderated Operating Temp

-55.0 deg celsius minimum and 125.0 deg celsius maximum

Details

The temperature/s/ at which an item can function without voltage derating.

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Details

The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Details

The limits of permissible deviation per section of a measured value from a specified value.

Case Material

plastic

Details

The chemical compound or mechanical mixture properties of which the case is fabricated. please use mrc matt with isac table 0326 in place of this canceled mrc.

Insulation Resistance At Reference Temp

100000.0 megohms

Details

Direct current resistance between two conductors that are separated by an insulating material,measured at reference temperature.

Dissipation Factor At Reference Temp In Percent

2.5000

Details

The ratio of resistance to capacitive reactance measured at reference temperature.

Terminal Surface Treatment

solder

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated. the treatment is designed to protect the terminal surface(s) and cannot be wiped off.

Nuclear Hardness Critical Feature

hardened

Details

An indication of the nuclear hardness criticality of the item.

Test Data Document

81349-milc-39014 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Terminal Type And Quantity

2 uninsulated wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Specification/Standard Data

81349-mil-c-39014/1 government specification

Details

The document designator of the specification or standard which established the item of supply.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
10164087	A486G	9	-	6	9	-	WF
CC0827827	D0894	3	-	5	2	-	ZG
CC0920754	D0894	3	-	5	2	-	ZG
4111888-087	05869	5	-	C	1	-	TX
5209-914	05869	6	-	C	1	-	TX
947254-1590	06481	6	-	C	1	-	TX
913-5019-710	13499	5	-	C	1	-	48
2092W19P047	97424	6	-	C	1	-	TX
C09660-1591	59885	5	-	C	1	-	TX
C321C683K5R5CA	05397	3	-	C	1	-	TX
CK05BX683K	81349	6	-	C	1	-	ZZ
CK05BX683M	81349	6	-	C	1	-	ZZ
CKR05BX683KS	81349	3	-	5	9	-	TX
JM39014/1-1470	81349	6	-	C	1	-	ZZ
M39014-01-0430	81349	3	-	5	9	-	TX
M39014-01-0470	81349	E	-	5	9	-	TX
M39014-01-1430	81349	3	-	5	9	-	TU
M39014-01-1470	81349	3	-	5	9	-	TU
M39014-01-1550	81349	3	-	5	9	-	TU
M39014-01+1550	81349	3	-	5	9	-	TX
M39014/01-1471	81349	6	-	C	1	-	ZZ
M39014/01-1510	81349	3	-	5	9	-	TX
M39014/01-1590	81349	3	-	2	2	-	TX
M39014/01-1591	81349	3	-	5	9	-	TX
M39014+01+0431	81349	3	-	5	9	-	TX
MIL-C-39014/1	81349	3	-	5	9	-	TX
MIL-PRF-39014/1	81349	E	-	4	1	-	ZZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34450	-	P	-

RVC	WCC	TCC	SHC
-	72D	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Fast Quote Times
Qualified sales team
100% Product Inspections
Counterfeit Parts Prevention

Manufacturer

ROSEMOUNT INC DBA FISHER ROSEMOUNT SERVICE AND SUPPORT

CAGE: 04274

EDEN PRAIRIE , MN , 55344-3620

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5910-00-132-5968

What is the NIIN of the NSN 5910-00-132-5968?

The National Item Identification Number (NIIN) of the NSN 5910-00-132-5968 is 00-132-5968

When the NSN 5910-00-132-5968 was assigned to the Federal Catalog?

It was assigned 51 years ago, on Wed, Jan 10, 1973

Does the NSN 5910-00-132-5968 contain any precious metals?

Does not contain precious metal

Does the NSN 5910-00-132-5968 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.