Ceramic Dielectr Fixed Capacitor

1801C0G050A470M

(NSN) National Stock Number

5910-01-083-2087

Federal Supply Classification

5910 Capacitors

Item Name Code

00007

Schedule B Code

8532290040

Summary

W/o mtg facilities, axial terminals body style, established reliability indicator, 0.0100 reliability failure rate level in percent, 1.250 inches minimum terminal length, 0.090 inches nominal body diameter, 0.160 inches nominal body length

DAC	HCC	DMIL	RNCC
3	-	-	C

RNVC	SADC	MSDS	RNAAC
1	AW	-	TX

Identification

A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

INC	FIIG	Concept	Condition
00007	A010B0	1	1

Specifications

Body Style

w/o mtg facilities, axial terminals

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

Reliability Indicator

established

Details

An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.

Reliability Failure Rate Level In Percent

0.0100

Details

The rate of failure determined under specified conditions to establish the reliability of an item,expressed in percent.

Terminal Length

1.250 inches minimum

Details

A measurement of the longest dimension of a terminal,in distinction from width.

Body Diameter

0.090 inches nominal

Details

The length of a straight line which passes through the center of the body,and terminates at the circumference.

Body Length

0.160 inches nominal

Details

A measurement of the longest dimension of the body,in distinction from width.

Terminal Diameter

0.016 inches nominal

Details

The length of a straight line which passes through the center of a terminal,and terminates at the circumference.

Schematic Diagram Designator

no common or grounded electrode(s)

Details

A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.

Insulation Resistance At Maximum Operating Temp

10000.0 megohms

Details

Direct current resistance between two conductors that are separated by an insulating material,measured at the maximum operating temperature of the item.

Capacitance Value Per Section

47.000 picofarads single section

Details

The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.

Nonderated Operating Temp

-55.0 deg celsius minimum and 125.0 deg celsius maximum

Details

The temperature/s/ at which an item can function without voltage derating.

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

0.0 single section

Details

The constant that represents the proportionate change in capacitance per section caused by a change in temperature,expressed in parts per million per degree celsius.

Nonderated Continuous Voltage Rating And Type Per Section

200.0 dc single section

Details

The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-30.0 to 30.0 single section

Details

The limits of permissible deviation of the temperature coefficient per section from the rated value,expressed in parts per million per degree celsius.

Tolerance Range Per Section

-2.00 to 2.00 percent single section

Details

The limits of permissible deviation per section of a measured value from a specified value.

Case Material

plastic

Details

The chemical compound or mechanical mixture properties of which the case is fabricated. please use mrc matt with isac table 0326 in place of this canceled mrc.

Insulation Resistance At Reference Temp

100000.0 megohms

Details

Direct current resistance between two conductors that are separated by an insulating material,measured at reference temperature.

Dissipation Factor At Reference Temp In Percent

0.1500

Details

The ratio of resistance to capacitive reactance measured at reference temperature.

Terminal Surface Treatment

solder

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated. the treatment is designed to protect the terminal surface(s) and cannot be wiped off.

Test Data Document

81349-mil-c-20 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Terminal Type And Quantity

2 uninsulated wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Specification/Standard Data

81349-mil-c-20/27 government specification

Details

The document designator of the specification or standard which established the item of supply.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
0160-4805	28480	5	-	C	1	-	TX
MA101A470JAA	28480	5	-	C	1	-	TX
945833-3034	06481	5	-	C	1	-	TX
292CC0G470J050B	56289	5	-	C	1	-	TX
CAC02C0G470J100	16299	5	-	C	1	-	TX
MA 10 1A 470 J	16299	4	-	5	9	-	9Z
MA105A470JHA	96095	5	-	C	1	-	TX
MA101A470JAA	04222	5	-	C	1	-	TX
SA101A470JAA	04222	5	-	C	1	-	TX
C114G470J2G56M	31433	5	-	C	1	-	TX
24113-0016	19397	1	-	C	1	-	TX
CCR75CG470GM	81349	3	-	5	9	-	TX
CCR75CG470GR	81349	3	-	2	2	-	TX
CCR75CG470JP	81349	3	-	5	9	-	TX
CCR75CG470JR	81349	3	-	5	9	-	48
MIL-C-20/27	81349	3	-	4	1	-	TX
MILC0020-27	81349	3	-	5	9	-	TX
CKR11MENP0470J	14298	5	-	C	1	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34450	-	P	-

RVC	WCC	TCC	SHC
-	72D	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Fast Quote Times
Qualified sales team
100% Product Inspections
Counterfeit Parts Prevention

Manufacturer

VARADYNE INDUSTRIES INC

CAGE: 26654

SANTA MONICA , CA , 90400

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5910-01-083-2087

What is the NIIN of the NSN 5910-01-083-2087?

The National Item Identification Number (NIIN) of the NSN 5910-01-083-2087 is 01-083-2087

When the NSN 5910-01-083-2087 was assigned to the Federal Catalog?

It was assigned 45 years ago, on Thu, Sep 20, 1979

Does the NSN 5910-01-083-2087 contain any precious metals?

Does not contain precious metal

Does the NSN 5910-01-083-2087 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.