6 cylinder quantity, 4.250 inches standard bore diameter, air cleaner 1,base,mtg 1,cooler,fresh water 1,cooler,lubricating oil 1,filter,fuel oil 1,filter,lubricating oil 1,governor 1,pan,oil 1,pump,fresh water 1,pump,fuel transfer 1,pump,sea water 1,tank,expansion,water 1 accessory components and quantity, 2900.00 pounds weight, 1 reverse speed quantity, straight in-line cylinder arrangement
DAC
HCC
DMIL
RNCC
6
-
-
3
RNVC
SADC
MSDS
RNAAC
1
-
-
HA
Identification
A reciprocating internal combustion engine in which the power necessary to produce motion of the mechanism is obtained by igniting a compressed fuel and air mixture within the cylinder or cylinders by extreme heat resulting from compression. The engine consists of a cylinder block assembly complete with cylinder head(s) and oil pan(s). It may include attachments or accessories, such as starter motor, transmission for auxiliary equipment, clutch, oil filter, flywheel, flywheel housing or battery charging generator. A fuel tank is not included. For a complete operating power unit mounted on a base, see power unit (1), diesel.
INC
FIIG
Concept
Condition
03751
T197-A
-
1
Specifications
Cylinder Quantity
6
Details
The number of cylinders incorporated in the item.
Standard Bore Diameter
4.250 inches
Details
The length of a straight line which passes through the center of the cylinder /engine,compressor,or the like/,and terminates at the inside diameter.
Accessory Components And Quantity
air cleaner 1,base,mtg 1,cooler,fresh water 1,cooler,lubricating oil 1,filter,fuel oil 1,filter,lubricating oil 1,governor 1,pan,oil 1,pump,fresh water 1,pump,fuel transfer 1,pump,sea water 1,tank,expansion,water 1
Details
The name and number of parts supplied with the item which may be required for application.
Weight
2900.00 pounds
Details
A relative measure of the mass of an item with respect to its density.
Reverse Speed Quantity
1
Details
The number of reverse speeds provided.
Cylinder Arrangement
straight in-line
Details
The arrangement of the cylinders.
Stroke Length
5.000 inches
Details
The measured distance of the stroke.
Strokes Per Cycle
2
Details
The number of strokes required to complete one cycle.
Piston Action Type
single acting
Details
Indicates the type of piston action provided.
Crankshaft Rotation Direction
counterclockwise
Details
The crankshaft rotation direction viewed from and facing the main driving end.
Starting Method
electrical
Details
The means used to start the item.
Transmission Type
manual
Details
Indicates the type of transmission used to transfer developed mechanical energy to the drive unit.
Forward Speed Quantity
1
Details
The number of forward speeds provided.
Main Power Takeoff Rotation Direction
clockwise
Details
The direction of the main power takeoff rotation,when viewed from and facing the main drive end.
Reduction Gear Ratio
3.05 to 1
Details
The ratio of the input revolutions per minute to the designed output revolutions per minute of the reduction gear.
Engine Overall Height
45.100 inches nominal
Details
The distance measured in a straight line from the bottom to the top of the engine.
Engine Overall Length
81.000 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the engine.
Engine Overall Width
31.600 inches nominal
Details
An overall measurement taken at right angles to the length of the engine,in distiction from thickness.
Special Features
90 cu mm injectors
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.
Reference Number Differentiating Characteristics
as differentiated by accessory components and quantity,crankshaft rotation direction,starting method,reduction gear,transmission,clutch and main power take-off rotation direction
Details
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.
Master-Cross Reference List
Part
CAGE
DAC
HCC
RNCC
RNVC
MSDS
RNAAC
64TL1
80072
5
-
5
2
-
XX
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC
PMIC
ESD/EMI
Criticality
N
A
-
-
Freight
Universal / National Freight and Handling Information
UFC
HMC
LTL
LCL
61410
-
W
M
RVC
WCC
TCC
SHC
1
593
Z
9
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
Frequently asked questions for NSN 2815-00-132-8693
What is the NIIN of the NSN 2815-00-132-8693?
The National Item Identification Number (NIIN) of the NSN 2815-00-132-8693 is 00-132-8693
When the NSN 2815-00-132-8693 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 2815-00-132-8693 contain any precious metals?
Does not contain precious metal
Does the NSN 2815-00-132-8693 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
We are one of the largest suppliers of National Stock Number (NSN) parts in the world. Here at NSN Equipment, we live on the cutting edge to give you the best service we possibly can.
And that service is why our customers return to us time and time again. Our credibility and our accolades only serve as testament to our industry-leading nature.
