Radio Frequency Interfere Filter

G300148S2

(NSN) National Stock Number

5915-00-008-8383

Federal Supply Classification

5915 Filters and Networks

Item Name Code

00765

Schedule B Code

8527995030

Summary

0.516 inches nominal overall length, 0.359 inches nominal body length, +10.0 to 55.0 vibration resistance range in hertz, -55.0 to 85.0 deg celsius operating temp range, 50.0 ohms blank source impedance rating per function, 50.0 ohms blank load impedance per function

DAC	HCC	DMIL	RNCC
1	-	-	3

RNVC	SADC	MSDS	RNAAC
2	-	-	TX

Identification

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

INC	FIIG	Concept	Condition
00765	A047B0	3	1

Specifications

Overall Length

0.516 inches nominal

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Body Length

0.359 inches nominal

Details

A measurement of the longest dimension of the body,in distinction from width.

Vibration Resistance Range In Hertz

+10.0 to 55.0

Details

The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.

Operating Temp Range

-55.0 to 85.0 deg celsius

Details

The minimum and maximum limits of temperature at which the item is rated for operation.

Source Impedance Rating Per Function

50.0 ohms blank

Details

The total opposition per function,presented by a source of energy to the input terminals of an item.

Load Impedance Per Function

50.0 ohms blank

Details

The total opposition per function,presented by a load to the output terminals of an item.

Operating Current Rating Per Function In Amps

10.0 blank

Details

The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.

Mounting Facility Screw Thread Series Designator

unc

Details

A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.

Inclosure Type

hermetically sealed

Details

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.

Width Across Flats

0.241 inches minimum and 0.250 inches maximum

Details

The shortest straight line between flats,perpendicular to the height.

Mounting Facility Type And Quantity

1 threaded bushing 3rd function

Details

Indicates the type and number of facilities by which the item is mounted.

Functional Terminal Type And Quantity

1 turret input 1st function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

1 turret output 2nd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Operating Voltage Rating And Type Per Function

100.0 volts dc blank

Details

The level of electrical potential and type of current,per function,for which the item is designed.

Nominal Thread Size

0.164 inches

Details

A designation that is used for the purpose of general identification of the thread.

Body Material

metal

Details

The chemical compound or mechanical mixture properties of which the body is fabricated.

Maximum Dielectric Withstanding Dc Voltage

300.0 volts at sea level

Details

The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.

Precious Material And Location

case silver

Details

An indication of the precious material and its location in the item.

Precious Material

silver

Details

Identification of the precious material contained in the item.

Style Designator

round terminal/terminals on opposite surfaces

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
1250-009	12294	1	-	5	9	-	TX
550-40	12294	1	-	5	9	-	TX
550-40	72982	1	-	5	9	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	S	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
58500	-	P	-

RVC	WCC	TCC	SHC
-	72D	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Fast Quote Times
Qualified sales team
100% Product Inspections
Counterfeit Parts Prevention

Manufacturer

L3HARRIS TECHNOLOGIES, INC DIV SPACE & AIRBORNE SYSTEMS

CAGE: 24930

VAN NUYS , CA , 91406-2027

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5915-00-008-8383

What is the NIIN of the NSN 5915-00-008-8383?

The National Item Identification Number (NIIN) of the NSN 5915-00-008-8383 is 00-008-8383

When the NSN 5915-00-008-8383 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Sun, Jul 23, 1972

Does the NSN 5915-00-008-8383 contain any precious metals?

Contains silver

Does the NSN 5915-00-008-8383 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.