Radio Frequency Interfere Filter
1205-503
(NSN) National Stock Number
5915-00-070-6131
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00765
Schedule B Code
8527995030
Summary
1.938 inches nominal overall length, 0.125 inches nominal mounting slot width, 1.125 inches nominal body length, 0.700 inches nominal body width, 1.340 inches nominal body height, 1.625 inches nominal distance between centerlines of mounting facilities parallel to body length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | KE |
Identification
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00765 | A047B0 | 3 | 1 |
Specifications
Overall Length
1.938 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Mounting Slot Width
0.125 inches nominal
Details
A measurement taken at right angles to the length of the mounting slot,in distinction from thickness.Body Length
1.125 inches nominal
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
0.700 inches nominal
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Height
1.340 inches nominal
Details
A measurement from the bottom to the top of the body,in distinction from depth.Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
1.625 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the length of the item.Vibration Resistance Range In Hertz
+10.0 to 500.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
0.375 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the width of the item.Operating Temp Range
-55.0 to 125.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Average Life Rating In Hours
1000.0
Details
The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.Input Impedance Per Function W/Load
50.0 ohms 2nd radio interference 2nd function
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Input Impedance Per Function W/Load
50.0 ohms 3rd radio interference 3rd function
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Input Impedance Per Function W/Load
50.0 ohms 4th radio interference 4th function
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Input Impedance Per Function W/Load
50.0 ohms 5th radio interference 5th function
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Input Impedance Per Function W/Load
50.0 ohms 1st radio interference 1st function
Details
The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).Output Impedance Per Function W/Source Across Input
50.0 ohms 2nd radio interference 2nd function
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Output Impedance Per Function W/Source Across Input
50.0 ohms 3rd radio interference 3rd function
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Output Impedance Per Function W/Source Across Input
50.0 ohms 1st radio interference 1st function
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Output Impedance Per Function W/Source Across Input
50.0 ohms 4th radio interference 4th function
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Output Impedance Per Function W/Source Across Input
50.0 ohms 5th radio interference 5th function
Details
The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).Operating Current Rating Per Function In Amps
5.0 1st radio interference 1st function
Details
The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.Operating Current Rating Per Function In Amps
5.0 2nd radio interference 2nd function
Details
The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.Operating Current Rating Per Function In Amps
5.0 3rd radio interference 3rd function
Details
The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.Operating Current Rating Per Function In Amps
5.0 4th radio interference 4th function
Details
The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.Operating Current Rating Per Function In Amps
5.0 5th radio interference 5th function
Details
The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.Inclosure Type
encased
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
4 slot
Details
Indicates the type and number of facilities by which the item is mounted.Functional Terminal Type And Quantity
5 tab, solder lug output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
5 tab, solder lug input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Operating Voltage Rating And Type Per Function
1.0 kilovolts dc 1st radio interference 1st function
Details
The level of electrical potential and type of current,per function,for which the item is designed.Operating Voltage Rating And Type Per Function
1.0 kilovolts dc 2nd radio interference 2nd function
Details
The level of electrical potential and type of current,per function,for which the item is designed.Operating Voltage Rating And Type Per Function
1.0 kilovolts dc 3rd radio interference 3rd function
Details
The level of electrical potential and type of current,per function,for which the item is designed.Operating Voltage Rating And Type Per Function
1.0 kilovolts dc 4th radio interference 4th function
Details
The level of electrical potential and type of current,per function,for which the item is designed.Operating Voltage Rating And Type Per Function
1.0 kilovolts dc 5th radio interference 5th function
Details
The level of electrical potential and type of current,per function,for which the item is designed.Body Material
metal
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Body Surface Treatment
silver
Details
The metallic,nonmetallic,and/or chemical properties with which the body is plated,dipped and/or coated. the treatment is designed to protect the body surface/s/ and cannot be wiped off.Style Designator
rectangular terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| SK1858-000 | 12294 | 5 | - | 5 | 9 | - | TX |
| 241-0426-00 | 13499 | 5 | - | 3 | 9 | - | KE |
| SK1858-000 | 72982 | 5 | - | 5 | 9 | - | KE |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | S | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58500 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
FAQs
Frequently asked questions for NSN 5915-00-070-6131
What is the NIIN of the NSN 5915-00-070-6131?
The National Item Identification Number (NIIN) of the NSN 5915-00-070-6131 is 00-070-6131
When the NSN 5915-00-070-6131 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 5915-00-070-6131 contain any precious metals?
Contains silver
Does the NSN 5915-00-070-6131 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products