Radio Frequency Interfere Filter
1225-002
(NSN) National Stock Number
5915-00-071-7608
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00765
Schedule B Code
8527995030
Summary
1.557 inches nominal overall length, 0.905 inches nominal body length, 0.375 inches nominal body outside diameter, +10.0 to 2000.0 vibration resistance range in hertz, -55.0 to 105.0 deg celsius operating temp range, 250.0 average life rating in hours
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 3 | - | - | C |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | AC | - | ZZ |
Identification
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00765 | A047B0 | 3 | 1 |
Specifications
Overall Length
1.557 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Length
0.905 inches nominal
Details
A measurement of the longest dimension of the body,in distinction from width.Body Outside Diameter
0.375 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Vibration Resistance Range In Hertz
+10.0 to 2000.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Operating Temp Range
-55.0 to 105.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Average Life Rating In Hours
250.0
Details
The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.Source Impedance Rating Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Operating Current Rating Per Function In Amps
3.0 blank
Details
The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.Principal Circuitry Type Per Function
inductance-capacitance blank
Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Mounting Facility Screw Thread Series Designator
unf
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.Inclosure Type
hermetically sealed
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
1 threaded bushing 3rd function
Details
Indicates the type and number of facilities by which the item is mounted.Functional Terminal Type And Quantity
1 tab, solder lug input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 tab, solder lug output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Operating Voltage Rating And Type Per Function
28.0 volts dc blank
Details
The level of electrical potential and type of current,per function,for which the item is designed.Nominal Thread Size
0.250 inches
Details
A designation that is used for the purpose of general identification of the thread.Body Material
metal
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Maximum Dielectric Withstanding Dc Voltage
100.0 volts at sea level
Details
The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.Style Designator
round terminal/terminals on opposite surfaces
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
87557-9118c6026 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 1225-002 | 12294 | 3 | - | 5 | 9 | - | TX |
| 5915000717608 | A00AM | 9 | - | 6 | 9 | - | YP |
| CF-291-1 | 96733 | 5 | - | 5 | 9 | - | TX |
| CF291-1 | 13675 | 5 | - | 5 | 2 | - | ZZ |
| CSK-21197 | 51406 | A | - | 5 | 9 | - | ZZ |
| 11726307-1 | 19200 | 1 | - | 3 | 2 | - | TX |
| 1225-002 | 59660 | 5 | - | 5 | 9 | - | TX |
| SCI2040-013 | 33095 | 5 | - | 5 | 9 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58500 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
FAQs
Frequently asked questions for NSN 5915-00-071-7608
What is the NIIN of the NSN 5915-00-071-7608?
The National Item Identification Number (NIIN) of the NSN 5915-00-071-7608 is 00-071-7608
When the NSN 5915-00-071-7608 was assigned to the Federal Catalog?
It was assigned 57 years ago, on Tue, Jul 25, 1967
Does the NSN 5915-00-071-7608 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-071-7608 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products
Radio Frequency Interfere Filter
5915-00-071-7608
1225-002
Radio Frequency Interfere Filter
5915-00-071-7608
5915000717608
Radio Frequency Interfere Filter
5915-00-071-7608
CF-291-1
Radio Frequency Interfere Filter
5915-00-071-7608
CF291-1
Radio Frequency Interfere Filter
5915-00-071-7608
CSK-21197
Radio Frequency Interfere Filter
5915-00-071-7608
11726307-1
Radio Frequency Interfere Filter
5915-00-071-7608
1225-002
Radio Frequency Interfere Filter
5915-00-071-7608
SCI2040-013