Radio Frequency Interfere Filter

D133

(NSN) National Stock Number

5915-00-275-0218

Federal Supply Classification

5915 Filters and Networks

Item Name Code

00765

Schedule B Code

8527995030

Summary

1.117 inches maximum overall length, 0.540 inches maximum body length, 0.416 inches maximum body outside diameter, +10.0 to 2000.0 vibration resistance range in hertz, -55.0 to 125.0 deg celsius operating temp range, 1000.0 average life rating in hours

DAC	HCC	DMIL	RNCC
5	-	-	E

RNVC	SADC	MSDS	RNAAC
8	-	-	KE

Identification

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

INC	FIIG	Concept	Condition
00765	A047B0	3	1

Specifications

Overall Length

1.117 inches maximum

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Body Length

0.540 inches maximum

Details

A measurement of the longest dimension of the body,in distinction from width.

Body Outside Diameter

0.416 inches maximum

Details

The length of a straight line which passes through the center of the body,and terminates at the outside circumference.

Vibration Resistance Range In Hertz

+10.0 to 2000.0

Details

The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.

Operating Temp Range

-55.0 to 125.0 deg celsius

Details

The minimum and maximum limits of temperature at which the item is rated for operation.

Average Life Rating In Hours

1000.0

Details

The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.

Source Impedance Rating Per Function

50.0 ohms blank

Details

The total opposition per function,presented by a source of energy to the input terminals of an item.

Load Impedance Per Function

50.0 ohms blank

Details

The total opposition per function,presented by a load to the output terminals of an item.

Operating Current Rating Per Function In Amps

0.5 blank

Details

The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.

Maximum Voltage Drop Per Function

180.0 millivolts dc blank

Details

The greatest amount of voltage loss per function,resulting from the devices inherent opposition to the flow of electrical current.

Principal Circuitry Type Per Function

inductance-capacitance blank

Details

Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.

Mounting Facility Screw Thread Series Designator

unf

Details

A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.

Inclosure Type

hermetically sealed

Details

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.

Mounting Facility Type And Quantity

1 threaded bushing

Details

Indicates the type and number of facilities by which the item is mounted.

Functional Terminal Type And Quantity

1 tab, solder lug input 1st function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

1 tab, solder lug output 2nd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Operating Voltage Rating And Type Per Function

50.0 volts dc blank

Details

The level of electrical potential and type of current,per function,for which the item is designed.

Nominal Thread Size

0.250 inches

Details

A designation that is used for the purpose of general identification of the thread.

Maximum Dielectric Withstanding Dc Voltage

62.5 volts at sea level

Details

The maximum direct current voltage that the insulating material/s/ of the item will withstand without resulting in disruptive discharge or deterioration.

Style Designator

round terminal/terminals on opposite surfaces

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Test Data Document

81349-mil-f-15733 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Specification/Standard Data

81349-mil-f-15733 government specification

Details

The document designator of the specification or standard which established the item of supply.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
121-071-0001	95542	1	-	E	8	-	KE
1JX2713	56289	5	-	E	8	-	KE
563067-001	56232	6	-	C	1	-	ZZ
8443-1050	16437	5	-	E	8	-	KE
FL11CW1ED3	81349	3	-	5	1	-	TX
M15733/23-0030	81349	3	-	2	2	-	TX
MIL-PRF-15733/23	81349	E	-	4	1	-	ZZ
MILF15733-23	81349	3	-	5	9	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
58500	-	P	-

RVC	WCC	TCC	SHC
-	72D	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Fast Quote Times
Qualified sales team
100% Product Inspections
Counterfeit Parts Prevention

Manufacturer

GULTON INDUSTRIES INC

CAGE: 90634

AMHERST , NY , 14228

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5915-00-275-0218

What is the NIIN of the NSN 5915-00-275-0218?

The National Item Identification Number (NIIN) of the NSN 5915-00-275-0218 is 00-275-0218

When the NSN 5915-00-275-0218 was assigned to the Federal Catalog?

It was assigned 51 years ago, on Wed, Aug 1, 1973

Does the NSN 5915-00-275-0218 contain any precious metals?

Type/content is unknown

Does the NSN 5915-00-275-0218 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.