Radio Frequency Interfere Filter

RACE11R047G

(NSN) National Stock Number

5915-00-401-7689

Federal Supply Classification

5915 Filters and Networks

Item Name Code

00765

Schedule B Code

8527995030

Summary

2.233 inches minimum and 2.313 inches maximum overall length, 0.682 inches minimum and 0.692 inches maximum body outside diameter, -55.0 to 85.0 deg celsius operating temp range, 20.0 blank operating current rating per function in amps, inductance-capacitance blank principal circuitry type per function, unf mounting facility screw thread series designator

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
9	-	-	48

Identification

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

INC	FIIG	Concept	Condition
00765	A047B0	3	1

Specifications

Overall Length

2.233 inches minimum and 2.313 inches maximum

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Body Outside Diameter

0.682 inches minimum and 0.692 inches maximum

Details

The length of a straight line which passes through the center of the body,and terminates at the outside circumference.

Operating Temp Range

-55.0 to 85.0 deg celsius

Details

The minimum and maximum limits of temperature at which the item is rated for operation.

Operating Current Rating Per Function In Amps

20.0 blank

Details

The level of electrical flow,per function,for which the item is designed to operate,expressed in ampers.

Principal Circuitry Type Per Function

inductance-capacitance blank

Details

Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.

Mounting Facility Screw Thread Series Designator

unf

Details

A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.

Inclosure Type

hermetically sealed

Details

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.

Mounting Facility Type And Quantity

1 threaded bushing

Details

Indicates the type and number of facilities by which the item is mounted.

Functional Terminal Type And Quantity

1 tab, solder lug input 1st function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

1 tab, solder lug output 2nd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Operating Voltage Rating And Type Per Function

115.0 volts ac blank and 250.0 volts dc blank

Details

The level of electrical potential and type of current,per function,for which the item is designed.

Nominal Thread Size

0.312 inches

Details

A designation that is used for the purpose of general identification of the thread.

Style Designator

round terminal/terminals on opposite surfaces

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Test Data Document

77633-fl5345 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
9012-001-0000	12294	3	-	3	9	-	TX
RACE11R047G	12294	5	-	5	9	-	48
SK4125-000	12294	2	-	5	9	-	TX
FL5345	09017	1	-	5	9	-	TX
450149-1	54X10	5	-	5	2	-	ZZ
RACE11R047G	90634	5	-	5	2	-	48
SK4125-000	72982	2	-	5	9	-	TU
450149-1	3B150	5	-	5	2	-	48
450149-1	49956	5	-	5	9	-	48

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
58500	-	P	-

RVC	WCC	TCC	SHC
-	72D	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Fast Quote Times
Qualified sales team
100% Product Inspections
Counterfeit Parts Prevention

Manufacturer

ERIE SPECIALTY PRODUCTS INC

CAGE: 72982

ERIE , PA , 16501-1503

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5915-00-401-7689

What is the NIIN of the NSN 5915-00-401-7689?

The National Item Identification Number (NIIN) of the NSN 5915-00-401-7689 is 00-401-7689

When the NSN 5915-00-401-7689 was assigned to the Federal Catalog?

It was assigned 54 years ago, on Wed, Apr 1, 1970

Does the NSN 5915-00-401-7689 contain any precious metals?

Type/content is unknown

Does the NSN 5915-00-401-7689 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.