Spur Gear
180596-1
(NSN) National Stock Number
3020-00-163-1405
Federal Supply Classification
3020 Gears, Pulleys, Sprockets and Transmission Chain
Item Name Code
05466
Schedule B Code
8483409000
Summary
Plain, solid body style, 1.0704 inches minimum and 1.0714 inches maximum pitch diameter, 15 teeth quantity, plain both ends bore style, 54.0 rockwell c minimum and 56.0 rockwell c maximum overall hardness rating, 1.212 inches nominal outside diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | AX |
Identification
A gear, cylindrical in form, with straight teeth on the outer surface parallel to the axis of the gear. See also gear, antibacklash, spur. For bulk material, see rod, pinion.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 05466 | A27300 | 1 | 1 |
Specifications
Body Style
plain, solid
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Pitch Diameter
1.0704 inches minimum and 1.0714 inches maximum
Details
A measurement indicating the diameter-pitch per specific measurement scale of the item.Teeth Quantity
15
Details
The number of teeth included on the item.Bore Style
plain both ends
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.Hardness Rating
54.0 rockwell c minimum and 56.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Nominal Outside Diameter
1.212 inches
Details
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.Tooth Form
standard
Details
An indication as to whether the teeth are a standard depth or modified to a shorter depth.Pressure Angle
25.0000 degrees
Details
The measurement of the pressure angle on the item.Face Nominal Width
0.626 inches
Details
A measurement taken at right angles to the length of the face,in distinction from thickness.Bore Nominal Diameter
0.562 inches both ends
Details
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.Precision Classification
quality number 10 or quality number 11
Details
The quality designation of an item as determined by industry,association,or manufacturer standards.Material
steel overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
cps4907 type h11 cage71791 mfr ref single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-c-8837,type2,class2 mil spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
hubless
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 64910 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
CURTISS-WRIGHT CONTROLS, INC. DBA CURTISS WRIGHT DIV ACTUATION DIVISION
CAGE: 71791
SHELBY
, NC
, 28152-0649
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3020-00-163-1405
What is the NIIN of the NSN 3020-00-163-1405?
The National Item Identification Number (NIIN) of the NSN 3020-00-163-1405 is 00-163-1405
When the NSN 3020-00-163-1405 was assigned to the Federal Catalog?
It was assigned 53 years ago, on Fri, Nov 12, 1971
Does the NSN 3020-00-163-1405 contain any precious metals?
Type/content is unknown
Does the NSN 3020-00-163-1405 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.