Nonmetallic Channel
MIL-R-6855
(NSN) National Stock Number
9390-00-103-0060
Federal Supply Classification
9390 Miscellaneous Fabricated Nonmetallic Materials
Item Name Code
30218
Schedule B Code
4016996000
Summary
Open channel cross-sectional shape style, 55.0 minimum shore durometer a and 65.0 maximum shore durometer a nonmetallic hardness rating, 1500 pounds per square inch minimum tensile strength, 100.0 deg celsius temp rating, 0.380 inches nominal overall height, 0.180 inches nominal overall width
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 3 | - | - | 4 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | CX |
Identification
A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing excludes:seal, nonmetallic channel.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 30218 | A547C0 | - | 1 |
Specifications
Cross-Sectional Shape Style
open channel
Details
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.Nonmetallic Hardness Rating
55.0 minimum shore durometer a and 65.0 maximum shore durometer a
Details
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.Minimum Tensile Strength
1500 pounds per square inch
Details
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Temp Rating
100.0 deg celsius
Details
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.Overall Height
0.380 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Width
0.180 inches nominal
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Right Side Flange Height
0.310 inches nominal
Details
None.Left Side Flange Thickness
0.060 inches nominal
Details
None.Right Side Flange Thickness
0.060 inches nominal
Details
None.Environmental Protection
low temperature and non-oil resistant
Details
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.Base Flange Thickness
0.070 inches nominal
Details
None.Left-Side Flange Tip Style
left square end
Details
The style designation corresponding to the shape of the left-side flange tip.Right-Side Flange Tip Style
right square end
Details
The style designation corresponding to the shape of the right-side flange tip.Material
rubber synthetic
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-r-6855,class 3,grade 60 mil spec single material response
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Nondefinitive Spec/Std Data
3 class and extrudedshape form and 60 grade
Details
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 1335 | 77969 | 1 | - | 5 | 9 | - | CX |
| 110-029-1 | 97499 | 1 | - | 3 | 2 | - | CX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 77670 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 846 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE: 81349
FAQs
Frequently asked questions for NSN 9390-00-103-0060
What is the NIIN of the NSN 9390-00-103-0060?
The National Item Identification Number (NIIN) of the NSN 9390-00-103-0060 is 00-103-0060
When the NSN 9390-00-103-0060 was assigned to the Federal Catalog?
It was assigned 56 years ago, on Wed, Jun 12, 1968
Does the NSN 9390-00-103-0060 contain any precious metals?
Type/content is unknown
Does the NSN 9390-00-103-0060 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products