Shouldered Shaft
02318-0144-0200
Plain first end style, not identical end similarity, plain second end style, 2.000 inches nominal overall length, hawkeye e2c aircraft end item identification, 0.8650 inches nominal first end diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22914 | A23200 | 1 | 1 |
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Details
A term used to identify the ends as identical or not identical.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
The national stock number or the identification information of the end equipment for which the item is a part.Details
The length of a straight line which passes through the center of the first end,and terminates at the circumference.Details
The length of a straight line which passes through the center of the second end,and terminates at the circumference.Details
The number of steps provided.Details
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| W21046-200 | 59885 | 5 | - | 5 | 9 | - | AX |
| W21046-200 | 70255 | A | - | 5 | 9 | - | ZZ |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 65750 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
What is the NIIN of the NSN 3040-00-021-4403?
When the NSN 3040-00-021-4403 was assigned to the Federal Catalog?
Does the NSN 3040-00-021-4403 contain any precious metals?
Does the NSN 3040-00-021-4403 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.