Shouldered Shaft
A407646-00
Flat keyway first end style, not identical end similarity, slotted second end style, 1.875 inches nominal overall length, 0.063 inches nominal second end slot width, 0.0638 inches minimum and 0.0652 inches maximum first end keyway width
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | HD |
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22914 | A23200 | 1 | 1 |
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Details
A term used to identify the ends as identical or not identical.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
None.Details
A measurement taken at right angles to the length of the keyway at the first end,in distinction from thickness.Details
None.Details
A measurement between specified points of the keyway at the first end.Details
The length of a straight line which passes through the center of the first end,and terminates at the circumference.Details
The length of a straight line which passes through the center of the second end,and terminates at the circumference.Details
None.Details
The number of steps provided.Details
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 65750 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
What is the NIIN of the NSN 3040-00-057-2934?
When the NSN 3040-00-057-2934 was assigned to the Federal Catalog?
Does the NSN 3040-00-057-2934 contain any precious metals?
Does the NSN 3040-00-057-2934 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.