Shouldered Shaft
180880-1
Splined (involute) first end style, identical end similarity, 56.800 inches nominal overall length, 0.6985 inches nominal first end diameter, 0.750 inches nominal first end spline length, 0.4760 inches nominal first end spline minor diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | KE |
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22914 | A23200 | 1 | 1 |
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Details
A term used to identify the ends as identical or not identical.Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
The length of a straight line which passes through the center of the first end,and terminates at the circumference.Details
A measurement of the longest dimension of the first end spline,in distinction from width.Details
The length of a straight line which passes through the center of the smallest circular cross section of the first end spline,and terminates at the circumference.Details
The length of a straight line which passes through the center of the largest circular cross section of the first end spline,and terminates at the circumference.Details
None.Details
A measurement indicating the diameter-pitch per measurement scale of the first end.Details
The number of steps provided.Details
None.Details
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 180880-1 | 0AHP5 | 5 | - | 3 | 2 | - | ZZ |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 65750 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
What is the NIIN of the NSN 3040-00-160-9852?
When the NSN 3040-00-160-9852 was assigned to the Federal Catalog?
Does the NSN 3040-00-160-9852 contain any precious metals?
Does the NSN 3040-00-160-9852 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.