Headless Grooved Pin
420827-1
(NSN) National Stock Number
5315-00-001-4672
Federal Supply Classification
5315 Nails, Machine Keys and Pins
Item Name Code
02386
Schedule B Code
7318230000
Summary
Chamfered first end style, 10.750 inches nominal overall length, 0.9973 inches minimum and 0.9986 inches maximum diameter, 10.468 inches minimum and 10.483 inches maximum effective length, 0.937 inches minimum and 0.943 inches maximum undercut diameter, 0.046 inches minimum and 0.049 inches maximum undercut width
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 mm). Excludes:rod, grooved, headless; shaft (as modified); and pin, vehicular leaf spring shackle.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 02386 | A212A0 | - | 1 |
Specifications
First End Style
chamfered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Overall Length
10.750 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Diameter
0.9973 inches minimum and 0.9986 inches maximum
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.Effective Length
10.468 inches minimum and 10.483 inches maximum
Details
A measurement of the longest effective dimension of an item.Undercut Diameter
0.937 inches minimum and 0.943 inches maximum
Details
None.Undercut Width
0.046 inches minimum and 0.049 inches maximum
Details
None.Second Undercut Width
0.046 inches minimum and 0.049 inches maximum
Details
None.First End Taper Length
0.031 inches nominal
Details
None.Second End Relationship With First End
identical
Details
Indicates whether or not the second end is identical to the first end.First End Location
both ends
Details
Indicates the location of the first end.First End Taper Angle
45.0 degrees nominal
Details
None.Material
steel comp 4130 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-s-624 comp 4130 fed spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-416,ty 1,cl 1 fed spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
groove
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49790 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION JOINT BASE JBMDL
CAGE: 80020
LAKEHURST
, NJ
, 08733-5035
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5315-00-001-4672
What is the NIIN of the NSN 5315-00-001-4672?
The National Item Identification Number (NIIN) of the NSN 5315-00-001-4672 is 00-001-4672
When the NSN 5315-00-001-4672 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Sep 27, 1972
Does the NSN 5315-00-001-4672 contain any precious metals?
Does not contain precious metal
Does the NSN 5315-00-001-4672 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.