Hexagon Slotted Plain Nut

324095-1

(NSN) National Stock Number

5310-00-001-1847

Federal Supply Classification

5310 Nuts and Washers

Item Name Code

01859

Schedule B Code

7318160000

Summary

3b thread class, right-hand thread direction, slotted, hexagon nut style, 0.562 inches nominal nut height, 0.738 inches minimum and 0.752 inches maximum width across flats, unf thread series

DAC	HCC	DMIL	RNCC
1	-	-	3

RNVC	SADC	MSDS	RNAAC
2	-	-	HD

Identification

A nut having a flat bearing surface and 6 flat sides with slots in its upper portion. It is designed to provide positive locking when used with a solid or split (cotter) pin. Excludes:nut (1), plain, castellated, hexagon.

INC	FIIG	Concept	Condition
01859	A021A0	1	1

Specifications

Thread Class

Details

A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction

right-hand

Details

The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

Nut Style

slotted, hexagon

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.

Nut Height

0.562 inches nominal

Details

None.

Width Across Flats

0.738 inches minimum and 0.752 inches maximum

Details

The shortest straight line between flats,perpendicular to the height.

Thread Series

unf

Details

A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.

Thread Quantity Per Inch

Details

The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Nominal Thread Size

0.500 inches

Details

A designation that is used for the purpose of general identification of the thread.

Criticality Code Justification

spcl

Details

The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

Bearing Surface Type

washer faced

Details

Indicates the type of bearing surface.

Special Features

material per mil-s-5000 or mil-s-6049; nut has rockwell hardness of c34-c39 in accordance with mil-h-6875 class a; 100% magnetic particle inspection per mil-i-6868 performed by both cir. and long. method, the wet or dry process with either fluor. or non-fluor. shall be used, no cracks allowed; nuts finished per qq-p-416 type ii cl 3; baked at 375 deg f for 23 hours after plating; embrittlement test per qq-p-416 does not apply; surface finished shall be 125 unless otherwise specified

Details

Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.

Material

steel overall

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Surface Treatment

cadmium overall

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

Special Test Features

items are being coded as critical to insure source inspection will be performed at the point of manufacture, prior to material receipt by the us navy or other dod components. these items are piece parts or end items in support of vital military hardware necessary to sustain the successful mission of the ships, submarines, and shore stations of the us navy. critical features including, but not limited to, dimensions, tolerances/clearances, electronic characteristics, and metallurgical properties will bespecified for government q ar (quality assurance representatives) to insure the highest possible degree of quality and reliability of these parts being delivered under navicp contracts

Details

Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.

Surface Treatment Document And Classification

qq-p-416,ty 2,cl 3 fed spec single treatment response overall

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
324095-1	30828	5	-	5	9	-	ZZ
324095-1	1V517	5	-	5	9	-	ZZ
324095-1	6W889	5	-	5	9	-	ZZ
324095-1	0A396	5	-	5	9	-	ZZ
324095-1	0L7G0	1	-	5	9	-	HD
324095-1	56878	5	-	5	2	-	ZZ
324095-1	1PK60	5	-	5	2	-	ZZ
324095-1	5S946	5	-	5	9	-	ZZ
324095-1	0M6Y0	5	-	5	2	-	ZZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
48950	-	W	-

RVC	WCC	TCC	SHC
-	573	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Fast Quote Times
Qualified sales team
100% Product Inspections
Counterfeit Parts Prevention

Manufacturer

NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION JOINT BASE JBMDL

CAGE: 80020

LAKEHURST , NJ , 08733-5035

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5310-00-001-1847

What is the NIIN of the NSN 5310-00-001-1847?

The National Item Identification Number (NIIN) of the NSN 5310-00-001-1847 is 00-001-1847

When the NSN 5310-00-001-1847 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Fri, Sep 22, 1972

Does the NSN 5310-00-001-1847 contain any precious metals?

Does not contain precious metal

Does the NSN 5310-00-001-1847 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.