Sleeve Nut

302K447

302K447
(NSN) National Stock Number
5310-00-040-1842
Federal Supply Classification
5310 Nuts and Washers
Item Name Code
29735
Schedule B Code
7318160000
Summary

2b thread class, right-hand thread direction, 0.250 inches nominal overall thread length, 0.125 inches nominal nut counterbore diameter, 0.281 inches nominal flange diameter, 0.255 inches nominal flange thickness

DAC HCC DMIL RNCC
5 - - 5
RNVC SADC MSDS RNAAC
9 - - KZ
Identification

An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use post, electrical-mechanical equipment. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use nut (1), plain (as modified). Excludes:nut (1), plain, cap. See also turnbuckle body.

INC FIIG Concept Condition
29735 A021A0 1 1
Specifications
Thread Class
2b
Details A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
Thread Direction
right-hand
Details The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
Thread Length
0.250 inches nominal overall
Details A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
Counterbore Diameter
0.125 inches nominal nut
Details The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.
Flange Diameter
0.281 inches nominal
Details The length of a straight line which passes through the center of a flange,and terminates at the circumference.
Flange Thickness
0.255 inches nominal
Details A measurement of the smallest dimension of a flange,in distinction from length or width.
Nut Length
0.120 inches nominal
Details A measurement of the longest dimension of the nut,in distinction from width.
Nut Counterbore Depth
0.094 inches nominal nut
Details The measurement of the enlarged portion adjacent to the threaded portion of a nut,in distinction from height.
Nut Width Across Flats
0.158 inches minimum and 0.163 inches maximum
Details A measurement of the width across the flats of a nut.
Cross-Sectional Shape
square nut
Details The geometric configuration of the item when viewed in cross section.
Thread Series
unf
Details A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
Thread Quantity Per Inch
48
Details The number of threads on the item per linear inch measured on a line parallel to the thread axis.
Nominal Thread Size
0.112 inches
Details A designation that is used for the purpose of general identification of the thread.
Special Features
engrave no. 6 0.125 in. high 0.015 in. min 0.020 in. max wide 0.015 in. deep,fill engraved no. with white screening enamel 1502 em and blue g117 and 1988 enamel
Details Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.
Material
steel comp 303 overall
Details The chemical compound or mechanical mixture properties of which the item is fabricated.
Material Document And Classification
astm a582,cond a assn std single material response overall
Details The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.
Surface Treatment
passivate overall
Details The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
302K447 1VPW8 5 - 5 9 - ZZ
NT9071-6 92755 1 - 3 2 - KZ
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
48950 - W U
RVC WCC TCC SHC
- 573 Z 9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

  • Fast Quote Times
  • Qualified sales team
  • 100% Product Inspections
  • Counterfeit Parts Prevention
Manufacturer
MOTOROLA INC. DBA INTEGRATED INFORMATION SYSTEMS GROUP
CAGE: 94990
SCOTTSDALE , AZ , 85257-3812
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5310-00-040-1842
What is the NIIN of the NSN 5310-00-040-1842?
The National Item Identification Number (NIIN) of the NSN 5310-00-040-1842 is 00-040-1842
When the NSN 5310-00-040-1842 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 5310-00-040-1842 contain any precious metals?
Type/content is unknown
Does the NSN 5310-00-040-1842 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

We are one of the largest suppliers of National Stock Number (NSN) parts in the world. Here at NSN Equipment, we live on the cutting edge to give you the best service we possibly can.

And that service is why our customers return to us time and time again. Our credibility and our accolades only serve as testament to our industry-leading nature.

Contact
3555 Agricultural Center Dr.
St. Augustine, FL, 32092
United States
© 2025 NSN Equipment, Inc. All rights reserved.
Made in USA