Plain Seal
AR10105-268A1H
(NSN) National Stock Number
5330-00-401-4367
Federal Supply Classification
5330 Packing and Gasket Materials
Item Name Code
04250
Schedule B Code
3926904500
Summary
C-section w/ flat spring cross-sectional shape style, -423.0 deg fahrenheit and 500.0 deg fahrenheit temp rating, 8.500 inches nominal accommodated shaft diameter, 0.141 inches nominal seal width, 8.742 inches nominal housing bore diameter, solid construction
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 3 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | KZ |
Identification
A pliable rubber or composition ring-shaped element, split or jointless (solid) not encased in a metal shell, but having a spring, spreader and/or molded-in reinforcement. It is designed to be pressmounted between fixed and movable or moving parts to form a tight and effective seal.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 04250 | A032A0 | - | 1 |
Specifications
Cross-Sectional Shape Style
c-section w/ flat spring
Details
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.Temp Rating
-423.0 deg fahrenheit and 500.0 deg fahrenheit
Details
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.Accommodated Shaft Diameter
8.500 inches nominal
Details
The length of a straight line which passes through the center of the accommodation for the shaft,and terminates at the circumference.Seal Width
0.141 inches nominal
Details
A measurement taken between the flat surfaces /front and back/ of the seal,in distinction from thickness.Housing Bore Diameter
8.742 inches nominal
Details
The length of a straight line which passes through the center of a circular housing bore,and terminates at the circumference.Construction
solid
Details
The structural characteristic of the item.Special Features
static type 8.480 in. id,8.762 in. od
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Material
plastic polytetrafluoroethylene sealing element
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 631 spring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5528 assn std single material response spring
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
astm d1457 ty 4 assn std single material response sealing element
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Special Test Features
special quality control testing
Details
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.Test Data Document
81349-milp-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Reference Number Differentiating Characteristics
material must conform to ships parts control center special quality control provisions
Details
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| AR10105-268A1H | 70709 | 5 | - | 5 | 9 | - | HX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 95100 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 596 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
SAINT-GOBAIN PERFORMANCE PLASTICS CORPORATION DIV OMNISEAL SOLUTIONS
CAGE: 05939
GARDEN GROVE
, CA
, 92841-1411
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5330-00-401-4367
What is the NIIN of the NSN 5330-00-401-4367?
The National Item Identification Number (NIIN) of the NSN 5330-00-401-4367 is 00-401-4367
When the NSN 5330-00-401-4367 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Thu, Jan 13, 1972
Does the NSN 5330-00-401-4367 contain any precious metals?
Type/content is unknown
Does the NSN 5330-00-401-4367 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products