Wire Wound Fixed Resistor
RER70F1211P
(NSN) National Stock Number
5905-00-007-0734
Federal Supply Classification
5905 Resistor
Item Name Code
00010
Schedule B Code
8533390080
Summary
-50.0 to 50.0 temp coefficient of resistance in ppm per deg celsius, 1.210 kilohms electrical resistance, -1.000 to 1.000 resistance tolerance in percent, 7.000 inches heat sink length, 5.000 inches heat sink width, 2.000 inches heat sink height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | 9Z |
Identification
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes:suppressor,ignition interference.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00010 | A001A0 | 1 | 1 |
Specifications
Temp Coefficient Of Resistance In Ppm Per Deg Celsius
-50.0 to 50.0
Details
A constant that represents the proportionate change in resistance caused by a change in temperature,expressed in parts per million change per degree celsius.Electrical Resistance
1.210 kilohms
Details
A measure of the opposition to the flow of electrical current.Resistance Tolerance In Percent
-1.000 to 1.000
Details
The limits of permissible variation in the electrical resistance value of an item from its rated value,expressed in percent.Heat Sink Length
7.000 inches
Details
The largest dimension of a flat rectangular/elliptical,or a chassis type of heat sink.Heat Sink Width
5.000 inches
Details
A measurement taken at right angles to the length of a flat rectangular/elliptical,or chassis type heat sink,in distinction from thickness.Heat Sink Height
2.000 inches
Details
A measurement from the bottom to the top of a chassis type heat sink,in distinction from depth.Heat Sink Thickness
0.040 inches
Details
A measurement of the smallest physical dimension of a heat sink,in distinction from length or width.Ambient Temp In Deg Celsius At Zero Percent Rated Power
275.0
Details
The ambient temperature at which the power dissipation of an item is operated to zero percent of the full rated power,expressed in degrees celsius.Temp Range Of Temp Coefficient In Deg Celsius
-55.0 to 275.0
Details
The maximum and minimum temperatures to which the temperature coefficient applies,expressed in degrees celsius.Terminal Length
0.438 inches nominal
Details
A measurement of the longest dimension of a terminal,in distinction from width.Body Length
1.062 inches nominal
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
0.531 inches nominal
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Height
0.562 inches nominal
Details
A measurement from the bottom to the top of the body,in distinction from depth.Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
0.719 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the length of the item.Power Dissipation Rating In Watts
20.000 heat sink
Details
The maximum amount of electrical energy that can be expended by an item,expressed in watts.Ambient Temp At Full Rated Power
25.0 deg celsius
Details
The temperature of the medium surrounding an item at which it can be operated continuously at full rated power.Inclosure Type
encased
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Hole Size
0.125 inches nominal
Details
Designates the size of the relative or proportionate dimension of the mounting hole.Terminal Type
tab, solder lug
Details
Indicates the type of terminal for providing electrical connection to the item.Material
aluminum alloy heat sink
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Style Designator
axial terminal (s)
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-r-18546 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Specification/Standard Data
81349-mil-r-18546/1f government specification
Details
The document designator of the specification or standard which established the item of supply.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 7902340-296 | 03956 | 4 | - | 5 | 2 | - | 9Z |
| 7902340-296 | 90536 | 4 | - | 5 | 9 | - | 9Z |
| MILR18546-1 | 81349 | 3 | - | 4 | 1 | - | TX |
| RE70N1211 | 81349 | 3 | - | 2 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | A | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 35140 | - | P | P |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 658 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE: 81349
FAQs
Frequently asked questions for NSN 5905-00-007-0734
What is the NIIN of the NSN 5905-00-007-0734?
The National Item Identification Number (NIIN) of the NSN 5905-00-007-0734 is 00-007-0734
When the NSN 5905-00-007-0734 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, Jun 30, 1972
Does the NSN 5905-00-007-0734 contain any precious metals?
Type/content is unknown
Does the NSN 5905-00-007-0734 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 5905-00-007-0734?
No known electrostatic discharge
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products