Assembled Washer Screw
SFSW10F8CPS01GY
(NSN) National Stock Number
5305-00-330-5486
Federal Supply Classification
5305 Screws
Item Name Code
06660
Schedule B Code
7318152000
Summary
2a thread class, right-hand thread direction, 0.408 inches minimum and 0.500 inches maximum thread length, 0.470 inches minimum and 0.500 inches maximum fastener length, pan head style, 0.495 inches minimum and 0.505 inches maximum head diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 4 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A screw, (as modified) to which has been assembled one or more nonremovable washer(s).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 06660 | A003B0 | - | 1 |
Specifications
Thread Class
2a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.408 inches minimum and 0.500 inches maximum
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Fastener Length
0.470 inches minimum and 0.500 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
pan
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.495 inches minimum and 0.505 inches maximum
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.174 inches minimum and 0.184 inches maximum
Details
A measurement from the bottom to the top of the head,in distinction from depth.Washer Quantity
1
Details
The number of washers included on the item.Internal Drive Style
cross recess type 1
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.Nominal Thread Diameter
0.190 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Features Provided
flat washer
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Thread Quantity Per Inch
32
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Primary Washer Outside Diameter
0.370 inches minimum and 0.380 inches maximum
Details
None.Primary Washer Style
flat
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the primary washer.Primary Washer Material Thickness
0.040 inches nominal
Details
None.Special Features
head material pigmented w/color 6307 per fed std 595
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Color
green head
Details
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.Material
plastic polyamide primary washer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 fastener
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Surface Treatment
passivate fastener
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response fastener
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unf
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| SFSW10F8CPS01BK | 12324 | 5 | - | C | 1 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
DUPREE, INC. DBA STAKE FASTENER DIV STAKE FASTENER CO.
CAGE: 66071
CHINO
, CA
, 91710-5740
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5305-00-330-5486
What is the NIIN of the NSN 5305-00-330-5486?
The National Item Identification Number (NIIN) of the NSN 5305-00-330-5486 is 00-330-5486
When the NSN 5305-00-330-5486 was assigned to the Federal Catalog?
It was assigned 51 years ago, on Sun, Dec 9, 1973
Does the NSN 5305-00-330-5486 contain any precious metals?
Does not contain precious metal
Does the NSN 5305-00-330-5486 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products