Shouldered Stud
539501-1
(NSN) National Stock Number
5307-00-026-3773
Federal Supply Classification
5307 Studs
Item Name Code
15946
Schedule B Code
-
Summary
2a nut thread thread class, 2a stud thread thread class, right-hand nut thread thread direction, right-hand stud thread thread direction, 0.160 inches nominal stud thread thread length, 0.390 inches minimum nut thread and 0.410 inches maximum nut thread thread length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TU |
Identification
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also stud, locked in.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15946 | A051A0 | - | 1 |
Specifications
Thread Class
2a nut thread
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Class
2a stud thread
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand nut thread
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Direction
right-hand stud thread
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.160 inches nominal stud thread
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Thread Length
0.390 inches minimum nut thread and 0.410 inches maximum nut thread
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Shoulder Diameter
0.250 inches nominal
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Shoulder Length
0.045 inches nominal
Details
The length of the enlarged portion/s/ located on the shank of the item.Overall Length
0.790 inches minimum and 0.810 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Nut End Shank Length
0.195 inches nominal
Details
None.Distance Across Flats
0.175 inches nominal
Details
The distance across the flats.Thread Quantity Per Inch
40 nut thread
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Thread Quantity Per Inch
40 stud thread
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.112 inches nut thread
Details
A designation that is used for the purpose of general identification of the thread.Nominal Thread Size
0.112 inches stud thread
Details
A designation that is used for the purpose of general identification of the thread.Stud End Shank Diameter
0.125 inches nominal
Details
None.Surface Treatment
anodize overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-a-8625 mil spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
shouldered
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Thread Series Designator
unc nut thread
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Thread Series Designator
unc stud thread
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 539501-1 | 70210 | 5 | - | 5 | 9 | - | SE |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 48950 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 573 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
HONEYWELL INTERNATIONAL, INC DIV AEROSPACE-TUCSON
CAGE: 64547
ORO VALLEY
, AZ
, 85737-9588
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5307-00-026-3773
What is the NIIN of the NSN 5307-00-026-3773?
The National Item Identification Number (NIIN) of the NSN 5307-00-026-3773 is 00-026-3773
When the NSN 5307-00-026-3773 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Tue, Oct 17, 1972
Does the NSN 5307-00-026-3773 contain any precious metals?
Type/content is unknown
Does the NSN 5307-00-026-3773 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products