Dust and Moisture Seal Boot
PL1976054 IT.58
(NSN) National Stock Number
5930-00-020-7934
Federal Supply Classification
5930 Switches
Item Name Code
19302
Schedule B Code
8538907080
Summary
2b thread class, 0.062 inches nominal thread length, dustproof-nema type 13 and watertight-nema type 4 hazardous locations/environmental protection, 0.250 inches nominal overall height, 1 mounting device quantity, compression sealing method
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | C |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | AC | - | ZZ |
Identification
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes:bellows, protection; grommet, nonmetallic; and cable nipple, electrical. See also cap, electrical; cap, protective, dust and moisture seal; and shield, electrical connector.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 19302 | A02000 | - | 2 |
Specifications
Thread Class
2b
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Length
0.062 inches nominal
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Hazardous Locations/Environmental Protection
dustproof-nema type 13 and watertight-nema type 4
Details
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.Overall Height
0.250 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Mounting Device Quantity
1
Details
The number of mounting devices used as a means of attaching the item.Sealing Method
compression
Details
The means by which the item is sealed.Base Height
0.088 inches nominal
Details
A measurement from the bottom to the top of a base,in distinction from depth.Width Across Flats
0.375 inches nominal
Details
The shortest straight line between flats,perpendicular to the height.Mounting Method
integral threaded nut
Details
The means of attaching the item.Opening Inside Diameter
0.188 inches nominal
Details
The length of a straight line which passes through the center of the two surfaces of a circular opening,and terminates at the inside circumference.Thread Series
uns
Details
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.Thread Quantity Per Inch
40
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Nominal Thread Size
0.250 inches
Details
A designation that is used for the purpose of general identification of the thread.Base Thread Location
internal
Details
Indicates the location of the thread on the base.Material
rubber silicone body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-r-5847,type a,class 3 mil spec single material response body
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
thru-hole
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-dtl-5423 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Specification/Standard Data
81349-mil-dtl-5423/11 government specification
Details
The document designator of the specification or standard which established the item of supply.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 352250014032 | H0203 | 3 | - | 5 | 1 | - | TX |
| 5930PL1627835 | 9009H | 9 | - | 6 | 9 | - | WP |
| JL80725 | K0119 | 4 | - | 5 | 9 | - | ZK |
| 19003-17 | 04009 | 3 | - | C | 1 | - | TX |
| 115389 | 16848 | 6 | - | C | 1 | - | ZZ |
| 404-9116-001 | 97896 | 3 | - | C | 1 | - | TX |
| M5423/11-01 | 81349 | 3 | - | 2 | 2 | - | TX |
| MIL-DTL-5423/11 | 81349 | E | - | 4 | 1 | - | ZZ |
| MILB5423-11 | 81349 | 3 | - | 5 | 9 | - | TX |
| N5032B | 81349 | 6 | - | C | 1 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 95100 | - | S | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 846 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NAVIGATION AND MARITIME SYSTEMS
CAGE: 03956
CHARLOTTESVILLE
, VA
, 22901-2827
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5930-00-020-7934
What is the NIIN of the NSN 5930-00-020-7934?
The National Item Identification Number (NIIN) of the NSN 5930-00-020-7934 is 00-020-7934
When the NSN 5930-00-020-7934 was assigned to the Federal Catalog?
It was assigned 57 years ago, on Sat, Apr 29, 1967
Does the NSN 5930-00-020-7934 contain any precious metals?
Does not contain precious metal
Does the NSN 5930-00-020-7934 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products
Dust and Moisture Seal Boot
5930-00-020-7934
352250014032
Dust and Moisture Seal Boot
5930-00-020-7934
5930PL1627835
Dust and Moisture Seal Boot
5930-00-020-7934
JL80725
Dust and Moisture Seal Boot
5930-00-020-7934
19003-17
Dust and Moisture Seal Boot
5930-00-020-7934
115389
Dust and Moisture Seal Boot
5930-00-020-7934
404-9116-001
Dust and Moisture Seal Boot
5930-00-020-7934
M5423/11-01
Dust and Moisture Seal Boot
5930-00-020-7934
MIL-DTL-5423/11
Dust and Moisture Seal Boot
5930-00-020-7934
MILB5423-11
Dust and Moisture Seal Boot
5930-00-020-7934
N5032B