Sleeve Bushing
8601617-1
(NSN) National Stock Number
3120-00-006-0504
Federal Supply Classification
3120 Unmounted Plain Bearings
Item Name Code
13206
Schedule B Code
8482997060
Summary
0.5310 inches nominal overall length, 0.4380 inches nominal body outside diameter, 0.3150 inches minimum and 0.3220 inches maximum body inside diameter, 0.5000 inches nominal flange outside diameter, 0.0630 inches nominal flange width, round inside left corner corner shape
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | C |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | AC | - | ZZ |
Identification
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13206 | A045A0 | - | 2 |
Specifications
Overall Length
0.5310 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
0.4380 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Body Inside Diameter
0.3150 inches minimum and 0.3220 inches maximum
Details
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.Flange Outside Diameter
0.5000 inches nominal
Details
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.Flange Width
0.0630 inches nominal
Details
A measurement taken at right angles to the length of a flange,in distinction from thickness.Corner Shape
round inside left corner
Details
The physical configuration of the corner.Corner Shape
round outside left corner
Details
The physical configuration of the corner.Corner Shape
round left flange body corner
Details
The physical configuration of the corner.Corner Shape
square inside right corner
Details
The physical configuration of the corner.Corner Shape
square left flange outside right corner
Details
The physical configuration of the corner.Corner Shape
square outside right corner
Details
The physical configuration of the corner.Hardness Rating
39.0 rockwell c minimum overall and 42.0 rockwell c maximum overall
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Surface Finish
125.0 microinches intermediate layer
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Material
steel comp 4130 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
mil-s-6758 mil spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
cadmium overall or chromate overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-c-8837,type 2,class 1 mil spec single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
solid, external flange one end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| LLXQBA144 | 06481 | 5 | - | C | 1 | - | ZZ |
| 8601617 | 17863 | 1 | - | 3 | 9 | - | KE |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 59240 | - | R | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV THE NAVIGATION, TARGETING AND SURVIVABILITY DIVISION
CAGE: 06481
WOODLAND HILLS
, CA
, 91367-6675
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3120-00-006-0504
What is the NIIN of the NSN 3120-00-006-0504?
The National Item Identification Number (NIIN) of the NSN 3120-00-006-0504 is 00-006-0504
When the NSN 3120-00-006-0504 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Mon, Jun 19, 1972
Does the NSN 3120-00-006-0504 contain any precious metals?
Does not contain precious metal
Does the NSN 3120-00-006-0504 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products