Quartz Crystal Unit

247327-0003

(NSN) National Stock Number

5955-00-009-4868

Federal Supply Classification

5955 Oscillators and Piezoelectric Crystals

Item Name Code

00196

Schedule B Code

8541900000

Summary

0.998 inches minimum and 0.998 inches minimum and 1.023 inches maximum1.023 inches maximum overall length, 0.223 inches minimum and 0.248 inches maximum terminal length, 0.757 inches maximum overall width, 0.775 inches maximum body length, 0.725 inches maximum body width, 0.317 inches maximum0.317 inches maximum body thickness

DAC	HCC	DMIL	RNCC
5	-	-	C

RNVC	SADC	MSDS	RNAAC
1	AF	-	TX

Identification

An item which consists of a quartz crystal resonator(s), suitably mounted in a holder, quartz crystal.

INC	FIIG	Concept	Condition
00196	A059A0	-	1

Specifications

Overall Length

0.998 inches minimum and 0.998 inches minimum and 1.023 inches maximum1.023 inches maximum

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Terminal Length

0.223 inches minimum and 0.248 inches maximum

Details

A measurement of the longest dimension of a terminal,in distinction from width.

Overall Width

0.757 inches maximum

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Body Length

0.775 inches maximum

Details

A measurement of the longest dimension of the body,in distinction from width.

Body Width

0.725 inches maximum

Details

A measurement taken at right angles to the length of the body,in distinction from thickness.

Body Thickness

0.317 inches maximum0.317 inches maximum

Details

A measurement of the smallest dimension of a body,in distinction from length or width.

Overall Thickness

0.352 inches maximum

Details

An overall measurement of the smallest dimension of an item,in distinction from length or width.

Terminal Diameter

0.048 inches minimum and 0.052 inches maximum

Details

The length of a straight line which passes through the center of a terminal,and terminates at the circumference.

Mode Of Oscillation

fundamental

Details

The mode of frequency at which the device is designed to operate.

Circuit Resonance

antiresonance

Details

The condition existing when the frequency or vibration equals the natural frequency.

Load Capacitance In Picofarads

29.5 minimum and 30.5 maximum

Details

The amount of electrical capacitance under a load condition,required for normal operation in a circuit,expressed in picofarads.

Shunt Capacitance In Picofarads

7.0 maximum

Details

The total static capacitance of the item when measured across the terminals,expressed in picofarads.

Specified Frequency

5.800667 megahertz

Details

The frequency at which the item is designed to operate under specified conditions.

Center To Center Distance Between Terminals

0.478 inches minimum and 0.494 inches maximum

Details

The center to center distance between terminals.

Operating Temp Range

-40.0 to 90.0 deg celsius and -55.0 to 105.0 deg celsius

Details

The minimum and maximum limits of temperature at which the item is rated for operation.

Drive Level Rating

8.0 milliwatts minimum and 12.0 milliwatts maximum

Details

The drive level at which the item is designed to operate.

Frequency Tolerance For Operating Temp In Percent

-0.002 to 0.002 and -0.003 to 0.003

Details

The permissible frequency deviation within the operating temperature range,expressed in percent.

Equivalent Resistance Value In Ohms

35.0 maximum

Details

The equivalent (effective) resistance for which the item is rated,expressed in ohms.

Style Designator

oval body, pin terminals

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Test Data Document

81349-mil-c-3098 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Specification/Standard Data

81349-mil-c-3098/109 government specification

Details

The document designator of the specification or standard which established the item of supply.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
CR130/U5M800000	81349	E	-	2	2	-	TX
MIL-C-3098/109	81349	E	-	5	9	-	TX
MIL-PRF-3098/109	81349	E	-	4	1	-	ZZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34525	-	W	-

RVC	WCC	TCC	SHC
-	72D	Z	9

Certified Supplier

Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.

Fast Quote Times
Qualified sales team
100% Product Inspections
Counterfeit Parts Prevention

Manufacturer

THALES USA, INC. DIV AIR MOBILITY SOLUTIONS ("AMS")

CAGE: 65597

OVERLAND PARK , KS , 66211-1408

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5955-00-009-4868

What is the NIIN of the NSN 5955-00-009-4868?

The National Item Identification Number (NIIN) of the NSN 5955-00-009-4868 is 00-009-4868

When the NSN 5955-00-009-4868 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Wed, Aug 2, 1972

Does the NSN 5955-00-009-4868 contain any precious metals?

Type/content is unknown

Does the NSN 5955-00-009-4868 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.