Quartz Crystal Unit
CR130/U5M800000
(NSN) National Stock Number
5955-00-009-4868
Federal Supply Classification
5955 Oscillators and Piezoelectric Crystals
Item Name Code
00196
Schedule B Code
8541900000
Summary
0.998 inches minimum and 0.998 inches minimum and 1.023 inches maximum1.023 inches maximum overall length, 0.223 inches minimum and 0.248 inches maximum terminal length, 0.757 inches maximum overall width, 0.775 inches maximum body length, 0.725 inches maximum body width, 0.317 inches maximum0.317 inches maximum body thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| E | - | - | 2 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item which consists of a quartz crystal resonator(s), suitably mounted in a holder, quartz crystal.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00196 | A059A0 | - | 1 |
Specifications
Overall Length
0.998 inches minimum and 0.998 inches minimum and 1.023 inches maximum1.023 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Terminal Length
0.223 inches minimum and 0.248 inches maximum
Details
A measurement of the longest dimension of a terminal,in distinction from width.Overall Width
0.757 inches maximum
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Body Length
0.775 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
0.725 inches maximum
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Thickness
0.317 inches maximum0.317 inches maximum
Details
A measurement of the smallest dimension of a body,in distinction from length or width.Overall Thickness
0.352 inches maximum
Details
An overall measurement of the smallest dimension of an item,in distinction from length or width.Terminal Diameter
0.048 inches minimum and 0.052 inches maximum
Details
The length of a straight line which passes through the center of a terminal,and terminates at the circumference.Mode Of Oscillation
fundamental
Details
The mode of frequency at which the device is designed to operate.Circuit Resonance
antiresonance
Details
The condition existing when the frequency or vibration equals the natural frequency.Load Capacitance In Picofarads
29.5 minimum and 30.5 maximum
Details
The amount of electrical capacitance under a load condition,required for normal operation in a circuit,expressed in picofarads.Shunt Capacitance In Picofarads
7.0 maximum
Details
The total static capacitance of the item when measured across the terminals,expressed in picofarads.Specified Frequency
5.800667 megahertz
Details
The frequency at which the item is designed to operate under specified conditions.Center To Center Distance Between Terminals
0.478 inches minimum and 0.494 inches maximum
Details
The center to center distance between terminals.Operating Temp Range
-40.0 to 90.0 deg celsius and -55.0 to 105.0 deg celsius
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Drive Level Rating
8.0 milliwatts minimum and 12.0 milliwatts maximum
Details
The drive level at which the item is designed to operate.Frequency Tolerance For Operating Temp In Percent
-0.002 to 0.002 and -0.003 to 0.003
Details
The permissible frequency deviation within the operating temperature range,expressed in percent.Equivalent Resistance Value In Ohms
35.0 maximum
Details
The equivalent (effective) resistance for which the item is rated,expressed in ohms.Style Designator
oval body, pin terminals
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-c-3098 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Specification/Standard Data
81349-mil-c-3098/109 government specification
Details
The document designator of the specification or standard which established the item of supply.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 247327-0003 | 65597 | 5 | - | C | 1 | - | TX |
| MIL-C-3098/109 | 81349 | E | - | 5 | 9 | - | TX |
| MIL-PRF-3098/109 | 81349 | E | - | 4 | 1 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34525 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
Certified Supplier
Order with confidence. We are a valued certified supplier serving customers in the military and aerospace industries.
- Fast Quote Times
- Qualified sales team
- 100% Product Inspections
- Counterfeit Parts Prevention
Manufacturer
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE: 81349
FAQs
Frequently asked questions for NSN 5955-00-009-4868
What is the NIIN of the NSN 5955-00-009-4868?
The National Item Identification Number (NIIN) of the NSN 5955-00-009-4868 is 00-009-4868
When the NSN 5955-00-009-4868 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Aug 2, 1972
Does the NSN 5955-00-009-4868 contain any precious metals?
Type/content is unknown
Does the NSN 5955-00-009-4868 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products